8987054-1-M-Husqvarna-501952401-Piston Ring
Part Location Diagram of 501952401 Husqvarna Piston Ring
See part M-10 in the diagram
( Grid squares measure 1x1 inch )
8987054-1-S-Husqvarna-501952401-Piston Ring 8987054-2-S-Husqvarna-501952401-Piston Ring Part Location Diagram of 501952401 Husqvarna Piston Ring

Piston Ring 501952401

$ 31.44
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX8987054
Manufacturer #:
501952401
Manufactured by:
Husqvarna

Product Description

This is a genuine Husqvarna part for use with Trimmers. The piston ring seals the gap between the piston and cylinder wall of the engine. The most common reasons for replacing the piston ring is if there is low compression, smoke coming from the engine, the engine is not turning over, the engine seizure or Loss of power. This part is sold individually. Here is a list of tools that are needed to replace the piston ring a receptacle for draining fuel, Torx wrenches, a spark plug wrench or socket, 10mm wrench (or adjustable), long-nosed pliers, rubber mallet, standard screwdriver, starter rope (or similar), adjustable pliers, 2-cycle oil (for lubricating cylinder), razor blade (to scrape gasket surface) and an ignition gapping gauge.

  • Works with the following brands:
    Husqvarna
  • Works with the following products:
    Trimmer, Brush Cutter