12644540-1-M-Husqvarna-545081601-Bearing-r8 (inner)
Part Location Diagram of 545081601 Husqvarna Bearing-r8 (inner)
See part D39 in the diagram
( Grid squares measure 1x1 inch )
12644540-1-S-Husqvarna-545081601-Bearing-r8 (inner) Part Location Diagram of 545081601 Husqvarna Bearing-r8 (inner)

Bearing-r8 (inner) 545081601

$ 11.20
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX12644540
Manufacturer #:
545081601
Manufactured by:
Husqvarna

Product Description

This is a genuine replacement part that is sourced from the original manufacturer for use with trimmers and gas powered blowers. The bearing is located on the inner side of the crankshaft and is used to limit friction between the shaft and the crankcase assembly. Replacing the bearing will require the entire motor to be disassembled by removing the fuel, remove the air cleaner, carburetor, spark plug, starter, flywheel, clutch, and separate the motor housing. Remove the piston and crankshaft and reassemble is opposite order, please note it is recommended to inspect and replace gaskets as necessary. This bearing is sold individually.

  • Works with the following brands:
    Craftsman, Weed Eater, Poulan, Husqvarna
  • Works with the following products:
    Trimmer, Leaf Blower / Vacuum, Pole Saw
  • Part# 545081601 replaces these:
    545081601