Spool 143684-01

This part includes one OEM spool replacement for a trimmer. This spool includes 20-feet of factory-wound 0.65-inch line. The spool houses the cutting line and is located inside the cutting head to cut grass and weeds. The spool can wear over time from being repeatedly tapped against the ground. You might also replace it to avoid having to wrap a new trimmer line when it runs out. For this quick and easy DIY repair, start by removing the bump cap from the trimmer head, which is secured with two plastic locking tabs. Depress the tabs and remove the cap from the hub. Now it should be easy to just remove the spool. Then take the trimmer line and pull out a few inches and lock it into the tab on the spool to hold it in place. Next, thread the trimmer line through the eyelet, align the spool with the shaft, and tug on the trimmer line to free it from the holder. To finalize the repair, reinstall the bump cap.