12009489-1-M-Broan-S93840003-Trunnion Nut
( Grid squares measure 1x1 inch )
12009489-1-S-Broan-S93840003-Trunnion Nut

Trunnion Nut S93840003

$ 26.77
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX12009489
Manufacturer #:
S93840003
Manufactured by:
Broan

Product Description

This is a genuine Broan replacement part. The trunnion nut is used in a trash compactor to hold the motor trunnion in place. This is a metal nut that comes with a packet of lubricating grease. To replace this part, you will need to remove the back panel, drawer assembly, and air scentry panel. Next, lower the ram manually to approximately 10-1/2" from the bottom assembly. You may need to rest it on a box or stand. Remove the screws from the nut retainer, raise the ram assembly slightly, and unscrew the nut. Remember to count the number of turns it takes to unscrew, because you'll want to reinstall the new part to the same position.

  • Works with the following brands:
    Broan
  • Works with the following products:
    Trash Compactor