Part Location Diagram of 489105-00 Delta Table Saw Switch
See part 77 in the diagram
( Grid squares measure 1x1 inch )

Table Saw Switch 489105-00

Works With Model TS220LS!
★★★★★
★★★★★
10 Reviews

Rated by 4 customers 

?

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$45.45
In Stock
Fix Number:
FIX10325609
Manufacturer #:
489105-00
Manufactured by:
Delta
Works With Model TS220LS!

Product Description

This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference List" below. This Switch has four terminals, a removable safety key, and a compact design for easy installation. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Switch is sold individually, and may also be referred to as a Rocker Switch.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.8 / 5.0, 4 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Jonathan from MOSCOW, ID
Parts Used:
489105-00
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Wouldn't start.
Remove. 2 screws, pull out wires. Switch unclips from plate.
Install new switch.
7 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
keith from EMPORIA, KS
Parts Used:
489105-00
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Power switch would not turn saw off
unplugged power cord.
removed the nut holding the power switch assembly on the saw.
removed 3 screws from the back cover.
removed the 2 white wires and 2 black wires from the switch terminal post. pay attention to wire color on each post.
removed old switch from the bracket by squeezing the sides of the old switch to remove the switch from the bracket.
inserted the new switch in place in the opening.
re attached the wires to the spade terminal on the switch using the 4 terminals. black on the 2 posts top and bottom on one side and the other side white on the top and bottom.
re attach the switch assembly to the table saw
test operation
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tom from LITTLETON, NH
Parts Used:
489105-00
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
On / Off Switch was broken
Very easy repair! Remove old switch which is held in by locking tabs. Squeeze tabs, switch pulls right out. Install new one, reconnect wires. Secured ground wire better, checked all connections.....done.

Tom
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elbert from POPLARVILLE, MS
Parts Used:
489105-00
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
switch went bad replaced with new one
replaced switch with new one
3 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (10 Reviews)
4.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX10325609
Manufacturer Part Number: 489105-00
Brand Model Number Description
Delta 11-090 Drill Press - Drill Press
Delta 11-900 Drill Press - Drill Press
Delta 11-950 Drill Press - Drill Press
Delta 11-980 Drill Press - Drill Press
Delta 11-985 Drill Press - Drill Press
Delta 11-990 Drill Press - Drill Press
Delta 14-040 Drill Press - Drill Press
Delta 14-070 Drill Press - 14&#34 Floor Drill Press
Delta 14-600 Drill Press - Mortiser
Delta 14-650 Drill Press - Mortiser
Delta 17-900 Drill Press - 16-1/2&#34 Drill Press
Delta 17-950L Drill Press - Delta 17-950l Type-1 Drill Press
Delta 22-540 Planer Jointer - 12 inch Planer
Delta 22-560 Planer Jointer - Planer
Delta 22-565 Planer Jointer - Delta 22-565 Planer
Delta 22-580 Planer Jointer - Planer
Delta 23-655 Angle Grinder - Grinder/Shapener
Delta 23-675 Angle Grinder - Grinder / Finisher
Delta 28-150 Band Saw - Band Saw
Delta 28-160 Band Saw - 10&#34 Bench Band Saw
Delta 28-180 Band Saw - 8&#34 Band Saw
Delta 28-185 Band Saw - Band Saw
Delta 28-190 Band Saw - Band Saw
Delta 28-195 Band Saw - Band Saw
Delta 28-231 Band Saw - 14&#34 Band Saw
Delta 28-254 Band Saw - 14&#34 Band Saw
Delta 28-255 Band Saw - Band Saw
Delta 28-269 Band Saw - Band Saw
Delta 28-270 Band Saw - Band Saw
Delta 28-293 Band Saw - 14&#34 Band Saw