Part Location Diagram of 1200851 Pflueger Bail Arm Guide
See part 30 in the diagram
( Grid squares measure 1x1 inch )

Bail Arm Guide 1200851

$ 0.00
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX18266494
Manufacturer #:
1200851
Manufactured by:
Pflueger

Product Description

This bail arm guide is sourced from the original manufacturer for spinning reels. It is a small plastic piece located near the bail arm. The bail arm guide ensures that the line is accurately placed onto the spool during retrieval. It helps to keep the line from getting tangled or getting caught between the spool and the body of the reel. The bail arm guide should be replaced if it is damaged or worn down, as a faulty bail arm guide will cause the line to tangle or break during use. You will need to remove the rotor cover to access the bail arm guide. Locate and remove the screws that secure the arm guide in place. Gently pull off the faulty bail arm guide and place the new bail arm guide in the same position. Secure the new part using the appropriate fasteners and ensure that it is aligned correctly.