Part Location Diagram of 951-11284 MTD Choke Knob
See part D-38 in the diagram
( Grid squares measure 1x1 inch )

Choke Knob 951-11284

$ 0.00
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9312341
Manufacturer #:
951-11284
Manufactured by:
MTD

Product Description

This choke knob is an authentic OEM replacement part designed for snowblowers. It is a small plastic knob, measuring 2 inches in diameter. It restricts the airflow to the engine which enriches the fuel mixture and makes it easier to start the snowblower when the engine is cold. Depending on your exact model you can find the choke knob either near the engine or on the control panel. Failure of the choke knob can occur due to wear, damage, or clogging. If the choke knob is damaged or worn down, you will have difficulties starting your snowblower, the engine may stall, and you will notice decreased performance from the snowblower. To remove the faulty choke knob, remove the clips or screws that hold it in place, and pull it off the shaft. Align the new choke knob with the shaft and secure it in place with the fasteners. Run your equipment and test the new choke knob to confirm that the choke can engage and disengage appropriately.