Pressure Cooker Seals and Gaskets

Fix Number

FIX10468650

Manufacturer Part Number

85659

Genuine Presto replacement part, this item is sold individually. This part acts as a seal for the 85407 Air Vent Cover Lock on the Presto Pressure Cookers & Pressure Canners listed below. It is placed above the ring on the inside of the lid for the cooker.

Fix Number

FIX10468415

Manufacturer Part Number

09909

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09909 Pressure Cooker Sealing Ring/Automatic Air Vent Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Automatic Air Vent will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468426

Manufacturer Part Number

09936

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09936 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

★★★★★

★★★★★

1 Review

Fix Number

FIX10468408

Manufacturer Part Number

09901

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09901 Pressure Cooker Sealing Ring/Automatic Air Vent Pack (6 Quart) is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468421

Manufacturer Part Number

09924

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09924 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468651

Manufacturer Part Number

85660

This is an original Presto part. This Gasket is used on many models of Presto pressure cookers and caners. This Gasket attaches onto the Lock Post (part number 85610). It is common for this part to ware out overtime and should be replaced on a regular basis to help prevent leaking. This Gasket simply slips onto the end of the Lock post. When replacing this part, it is recommended to clean the sealing surfaces.

Fix Number

FIX10468412

Manufacturer Part Number

09906

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09906 Pressure Cooker Sealing Ring/Automatic Air Vent Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Automatic Air Vent will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468409

Manufacturer Part Number

09902

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09902 Pressure Canner Sealing Ring/Air Vent is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Air Vent will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468410

Manufacturer Part Number

09903

This is a genuine Manufacturer Approved replacement part. This part is made out of Rubber and it includes the Lid Sealing Ring and an Air Vent Plug. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Air Vent Plug will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468414

Manufacturer Part Number

09908

This is a genuine Manufacturer Approved replacement part. This part is made out of Rubber and it includes the Lid Sealing Ring and an Air Vent Plug. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Air Vent Plug will pop out of the lid releasing the excess pressure in the pot.