Massager Parts

Link

$5.37

Fix Number: FIX17016507
Manufacturer Part Number: 45515000000

This is an OEM part from Oster Pro. This Link is used in many models of Oster Pro clippers. The Link is made of metal and has a post at one and a large hole in the other. This link helps drive the blades for cutting hair. The large hole sits on top of the Gear (part number 058908-000-000). The post then connects to the Lever (044946-005-000). This part will need to be lubricated when installed. Use the Clipper Grease (076300-105-005) to create a thin film anywhere there is a friction surface.

POWER CORD (8-FOOT)

$6.51

Fix Number: FIX19183871
Manufacturer Part Number: 110738000000

This is a manufacturer sourced replacement part designed for use with Oster Pro clippers. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. It is made out of rubber and metal. It is sold individually. To replace this cord you will need a screwdriver.

Gear

$22.80

Fix Number: FIX17016516
Manufacturer Part Number: 105520000000

Oster Pro has specifically made this Gear for use in many models of hair clippers for beauty, barber, and animals. This Gear is made of a composite plastic. This part is driven by the Armature and in turn is one of three parts that drive the cutting motion of the clipper blades. If too much tension is put on this gear, then it will strip out and will need to be replaced. This part is commonly purchased with the Lever (part number 0444946-005-000) and Clipper Grease (076300-105-005). When replacing this part, be sure to properly lubricate all moving parts.

Blade Support

$32.86

Fix Number: FIX17016833
Manufacturer Part Number: 151807000000

This genuine item is supplied directly from the original equipment manufacturer for use with Oster Pro clippers. It is an identical replacement for a missing or a faulty blade support that was installed on a new unit. The part helps to secure the blade, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is made of durable metal and is sold individually. Note, the <a href="http://www.ereplacementparts.com/blade-lock-p-1576234.html" target=blank><u>#151809-000-000 Blade Lock</u></a> is sold separately.

Cord And Plug Assembly, 12 Foot

$7.35

Fix Number: FIX17016513
Manufacturer Part Number: 110737000000

Cord And Plug Assembly, 12 Foot

Switch Assembly

$8.72

Fix Number: FIX17016511
Manufacturer Part Number: 104365000000

Genuine Oster Pro replacement part, this item is sold individually. It includes two leads with it. The switch to a electric tool is one of the most common replaced parts. Eventually a switch will degrade and not operate any longer. It is advised to order an extra switch to keep on hand.

Gear

$22.80

Fix Number: FIX17016521
Manufacturer Part Number: 58908000000

This part comes directly from Oster Pro. This Gear is used in many models of Oster Pro clippers. This Part is made from nylon. This part meshes with the worm on the Armature to help drive the Lever (part number 044946-005-000). This part needs to be replaced when it has a substantial amount of wear or when it has been torn through. This part is commonly purchased with the Link (045515-000-000) and Clipper Grease (076300-105-005).

Turning Lever

$6.40

Fix Number: FIX17016832
Manufacturer Part Number: 151801000000

It is a genuine item that is supplied by the original equipment manufacturer for use with Oster Pro clippers. The turning lever provides a user with a comfortable grip to control the blade. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. To ensure the correct installation of this turning lever, refer to the diagrams of your model. One durable plastic part is included. You will need a screwdriver to take the housing apart when performing this repair.

Rivet

$4.30

Fix Number: FIX10435108
Manufacturer Part Number: 042142-000-000

This is an OEM part sourced directly from the manufacturer. The rivet is found in Oster Pro pet dryers. This part is made of metal, and is used to secure the nozzle extension. When replacing this item, you will require a drill to remove the old part and a rivet gun to install the new one. This item is sold individually.

Connector-Crimp

$2.18

Fix Number: FIX10435212
Manufacturer Part Number: 055136-000-000

Popular Massager Parts

Massager Brands

Popular Massager Models

Massager Parts

Start With Your Model Number

Popular Massager Parts

Massager Brands

Popular Massager Models