Canner Parts

Air Vent Sealing Ring

$14.46

Fix Number: FIX10468413
Manufacturer Part Number: 09907

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09907 Pressure Canner Sealing Ring/Air Vent is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Air Vent will pop out of the lid releasing the excess pressure in the pot.

Safety Plug Kit

$25.13

Fix Number: FIX10468411
Manufacturer Part Number: 09905

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09905 Pressure Cooker Canner Sealing Ring/Overpressure Safety Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Air Vent Cover Lock

$9.11

Fix Number: FIX10468616
Manufacturer Part Number: 85407

Genuine Presto replacement part, it is sold individually. This is a safety feature for the Presto products listed below. Once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. This part is also known as a pressure cooker interlock.

Overpressure Plug

$6.25

Fix Number: FIX10468418
Manufacturer Part Number: 09915

This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Steam Gauge For Pressure Canne

$25.13

Fix Number: FIX10468714
Manufacturer Part Number: 85772

This is an Authentic Manufacturer Sourced replacement part used on certain Presto Pressure Canners. The steam gauge registers pressure readings during canning and cooking. Includes a Metal Gauge, Rubber Washer, Metal Washer, and a Metal Nut.

Vent Pipe

$9.74

Fix Number: FIX10468630
Manufacturer Part Number: 85608

This is a genuine Presto replacement part designed for use with pressure canners and cookers. This vent pipe is a safety feature, once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. It is made out of metal and it is sold individually.

Pressure Canner Cover Handle

$8.17

Fix Number: FIX10468618
Manufacturer Part Number: 85444

This is a genuine Presto replacement part, it is sold individually. The purpose of the 85444 Pressure Canner Cover Handle, is to tighten the cover to the pot. There are two of these on each of the Pressure Canners shown below. Each cover handle does include two mounting screws.

Cooking Rack

$14.46

Fix Number: FIX10468676
Manufacturer Part Number: 85707

Genuine Presto replacement part, this item is sold individually. The 85707 Cooking/Canning Rack is placed in the bottom of the Pressure Canners shown below. It is above the bottom of the the pot approximately 1/4-1/2 inch. If it was laying flat on the bottom of the canning pot, the heat from the pot would cause the canning jars to break.

Sealing Ring

$25.13

Fix Number: FIX10468443
Manufacturer Part Number: 09985

Genuine Manufacturer Approved Sealing ring for Preston Pressure Canners. This Sealing Ring includes the part #09915 overpressure plug in the package. The sealing ring fits around the inside rim of the cover and forms a pressure-tight seal between the cover and the body of the pressure canner during canning and cooking.

Pressure Regulator

$13.82

Fix Number: FIX10468437
Manufacturer Part Number: 09978

This part comes directly from Presto. The Regulator maintains the proper pressure in many canners and pressure cookers. This part is regulates the pressure to 15lbs per square inch. When the pressure reaches 15lbs the regulator starts to gently rock. This part is made of stainless steel and has a plastic handle. This part should be replaced if it no longer sits correctly on the Vent Pipe (part number 01058). No tools are needed to replace this part.

Popular Canner Parts

Canner Brands

Popular Canner Models

Canner Parts

Start With Your Model Number

Popular Canner Parts

Canner Brands

Popular Canner Models