Rear Roller Kit 42-28-0025

This is an authentic OEM rear roller kit for a band saw. It includes the metal mounting bracket, the lateral blade guide rollers, and the thrust guide roller, which all comes preassembled and ready to mount to your saw as-is. This kit also includes two mounting screws. The roller assembly is prone to wear due to its contact with the blade. The bearings can wear, which can cause them to seize. The metal mount can also become damaged if the blade makes contact. For this simple repair, remove the rear guard to expose the rear roller. Remove the roller and install your new one. There is a pin located on the back of the roller assembly, which aligns with the housing. Once you have it properly aligned, reinstall the screws and then the rear guard.