12496480-1-M-DeWALT-803846SV-BEARING
Part Location Diagram of 803846SV DeWALT BEARING
See part 11A in the diagram
( Grid squares measure 1x1 inch )
12496480-1-S-DeWALT-803846SV-BEARING Part Location Diagram of 803846SV DeWALT BEARING

BEARING 803846SV

$ 3.73
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX12496480
Manufacturer #:
803846SV
Manufactured by:
DeWALT

Product Description

This is an original replacement part manufactured for use with belt sanders, bayonet saws, and trim saws. The sealed bearing is commonly used to reduce friction between a spinning armature shaft and a stationary tool housing. Worn bearings can cause loud grinding sounds, and can seize the bearing putting excessive load on the motor. This bearing is sold as an individual replacement part.

  • Works with the following brands:
    Porter Cable, DeWALT, Black and Decker
  • Works with the following products:
    Sander Polisher, Jig Saw, Belt or Drum Sander
  • Part# 803846SV replaces these:
    803846SV, P803846SV