10355371-1-M-Flex-264571-Brush
Part Location Diagram of 264571 Flex Brush
See part 37 in the diagram
( Grid squares measure 1x1 inch )
10355371-1-S-Flex-264571-Brush Part Location Diagram of 264571 Flex Brush

Brush 264571

$ 5.20
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10355371
Manufacturer #:
264571
Manufactured by:
Flex

Product Description

This replacement part is sourced directly from the original manufacturer for use with several sanders and polishers. This item is most often secured between the cap and brush tube assembly on each side of the service armature. The purpose of brushes is to conduct current in an electric motor that powers the tool. Please note it is advised to replace both brushes at the same time to ensure even wear. This part is sold individually. A screwdriver, hex key and needle nose pliers may be needed to make the proper removal and replacement.

  • Works with the following brands:
    Flex
  • Works with the following products:
    Sander Polisher, Concrete Saw, Electric Drill, Mill