Belt
- Fix Number:
- FIX10106836
- Manufacturer #:
- 491937-00
- Manufactured by:
- Porter Cable
- Product Description
- This is a manufacturer-approved belt for a sander, and it is sold as an individual part. This rubber belt is 16-inches by 3/8-inches and has 80 teeth. It is located underneath the belt cover and is placed around the segmented drive pulley and driven pulley. It is what drives the sanding belt and sanding disk. It is common for the cogs to wear down over time, the belt can also crack, break, and start to fray along the edges. If the sander is overloaded this can speed up the wear of the belt. For this repair you will need to remove the belt cover, and then you will line up the belt onto the pulleys.
- Works with the following brands:
- Delta, Black and Decker
- Works with the following products
- Sander Polisher
Product Description
This is a manufacturer-approved belt for a sander, and it is sold as an individual part. This rubber belt is 16-inches by 3/8-inches and has 80 teeth. It is located underneath the belt cover and is placed around the segmented drive pulley and driven pulley. It is what drives the sanding belt and sanding disk. It is common for the cogs to wear down over time, the belt can also crack, break, and start to fray along the edges. If the sander is overloaded this can speed up the wear of the belt. For this repair you will need to remove the belt cover, and then you will line up the belt onto the pulleys.
-
Works with the following brands:Delta, Black and Decker
-
Works with the following products:Sander Polisher
Questions and Answers
Be the first to ask our experts a question about this part!
Model Compatibility
Manufacturer Part Number: 491937-00
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.