Part Location Diagram of WPW10370594 Whirlpool Pad
See part 12 in the diagram
( Grid squares measure 1x1 inch )

Pad WPW10370594

Works With Model GSF26C5EXY02!

Rated by 1 customers 

?

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$141.27
In Stock
Fix Number:
FIX11753882
Manufacturer #:
WPW10370594
Manufactured by:
Whirlpool
Works With Model GSF26C5EXY02!

Product Description

Grey

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Douglas from Clarksville, TN
Parts Used:
WPW10370594
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Dispenser stopped dispensing when holding down the pad
First, I removed the pad that was no longer working by sliding it upward until it came loose, followed by pulling it towards myself. Next, I snipped the wires closest to the pad and let them hang for use later on. Then I removed the control panel button assembly by gently pulling down on its lower edge (lip) while prying gently from the f ront, lower corner. (I worked from the lower left corner, but I imagine the lower right would work as well). Once the first tab was loose (there are three in total), I worked on the middle and right tabs along the bottom edge until the control panel assembly came off (pull the bottom edge toward you a little bit and then pull the assembly down, as there are tabs along the top of it). This was the most difficult part of the repair because you can't really see where to pull the control panel away. Finally, with the control panel off, I located the connector for the pad and disconnected it from the control PCB, tied the connector for the new pad to the old wires, then snaked the new pad's wiring and removed the old pad's wiring in the same pull. Lastly, I connected the new pad to the control PCB, gave a quick test, then replaced the control panel by reversing the steps I took to remove it. The replacement pad then goes into the open slot and slides down to lock into place and I was finished.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11753882
Manufacturer Part Number: WPW10370594
Brand Model Number Description
Whirlpool 5WSC20CAYB00 Refrigerator
Whirlpool 5WSC20CAYY00 Refrigerator
Whirlpool 6ISC20C6AY00 Refrigerator
Whirlpool 6WSC20C6XB00 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XB02 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XB04 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XD00 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XD02 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XD04 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XW00 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XW02 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XW04 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XY00 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XY02 Refrigerator - Side-by-side
Whirlpool 6WSC20C6XY04 Refrigerator - Side-by-side
Whirlpool 6WSC20C6YB00 Refrigerator
Whirlpool 6WSC20C6YY00 Refrigerator - Side-by-side
Whirlpool 7WSC19D2XL00 Refrigerator - Side-by-side
Whirlpool 7WSC19D2XS00 Refrigerator - Side-by-side
Whirlpool 7WSC19D2XW00 Refrigerator - Side-by-side
Whirlpool 7WSC21C4XA00 Refrigerator - Side-by-side
Whirlpool 7WSC21C4XW00 Refrigerator - Side-by-side
Whirlpool 7WSC21C4XY00 Refrigerator - Side-by-side
Whirlpool 7WSC21C4XY01 Refrigerator - Side-by-side
Whirlpool BRS62CBANA00 Refrigerator - Side-by-side
Whirlpool BRS62CBBNA00 Refrigerator - Side-by-side
Whirlpool BRS62CBBNA01 Refrigerator
Whirlpool BRS62CRANA00 Refrigerator - Side-by-side
Whirlpool BRS62CRBNA00 Refrigerator - Side-by-side
Whirlpool BRS62CRBNA01 Refrigerator