Ice Dispenser Door Chute WP2180353
$15.89
In Stock
- Fix Number:
- FIX11739035
- Manufacturer #:
- WP2180353
- Manufactured by:
- Whirlpool
Jump to:
Product Description
*Please note, this door chute is no longer being manufactured with a heater.
-
Works with the following brands:Whirlpool, Kenmore, KitchenAid, Estate
-
Works with the following products:Refrigerator
-
Fixes the following symptoms:Ice maker won’t dispense ice, Leaking, Door Sweating, Frost buildup
-
Part# WP2180353 replaces these:AP6005973, 2157651, 2167269, 2177296, 2179993, 2180351 ... Show more , 2180352, 2180353, 2203886, 2252076, 2261464, WP2180353VP Show less
- Works with the following brands:
- Whirlpool, Kenmore, KitchenAid, Estate
- Works with the following products
- Refrigerator
- Fixes the following symptoms
- Ice maker won’t dispense ice, Leaking, Door Sweating, Frost buildup
- Part# WP2180353 replaces these:
- AP6005973, 2157651, 2167269, 2177296, 2179993, 2180351, 2180352, 2180353, 2203886, 2252076, 2261464, WP2180353VP
Part Number Cross Reference
Videos For installing this part.
Replacing your Ice Dispenser Door Chute

Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Martin from Racine, WI
- Parts Used:
- WP2180353
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The foam rubber seal on the old ice door was deteriorating, leaving disgusting specks of black foam in our drinks.
I found that it was not necessary to remove the fascia of the ice/water dispenser or do any other disassembly. First, carefully remove the clear plastic ice chute that sits just above the paddle where you place your glass. You have to pinch it together to get the sides unhooked, then swing it down. It is still attached to the paddle wi
... Read more
th a plastic hook in the rear. You will have to keep pushing it down, rotating it until it clears the outer frame of the panel. It does take a bit of force, so go slowly. Once it is off, it is very simple to pry the retaining clips a bit with a screwdriver and drop the ice door off its actuator. Be careful, the screwdriver can easily slip and gouge you or crack the actuator. Once you wiggle the old door off, the new one goes on almost instantly. Then re-install the ice chute in reverse of how you removed it. Done!
Read less
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Raleigh, NC
- Parts Used:
- WP2180353
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Ice build up on ice dispenser chute since chute door did not close properly letting warm air into the freezer
First off I found a video on u-tube showing easy way to access the chute so I could correctly diagnose the problem. I removed the dispenser cover, disconnected the control panel after removing retaining screws and confirmed door was broken. I ordered the door and repeated the process removing the damaged door and replacing with new door,
... Read more
reconnected control panel and dispenser door. No more ice build up now.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Due to my ice door not closing up and causing freeze up my motor gave up
I followed some of the suggestions that I read on the site. tried opening up the advertised video, but don't think there was one. Biggest thing was to take the front panel off from the bottom.Due to my bad knees, I made the decision to remove the door and lay it on the floor. (be careful of the water line as I didn't remove that part of i
... Read more
t) it made the whole job a lot easier. Also took pictures of all of the electrical and such.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11739035
Manufacturer Part Number: WP2180353
Manufacturer Part Number: WP2180353
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.