Shelf Frame

Remove food from lower shelf and crisper bins. Remove glass from shelf frame and set aside. Remove crisper drawers by gently pushing up on clear plastic tabs which are in the stainless drawer glide. Remove frame from refrigerator. Remove clear waffled plastic pieces from crisper frame. Use patience. Remove crisper flap tops. You should no ... Read more w be down to the frame with a stainless steel rod and drawer glides on it. Unscrew the 3 screws in the rod and remove it saving pieces to reinstall. Unscrew and remove 2 screws in each drawer glide. Do not discard screws. Gently pop drawer guide slightly with screw driver and push it slowly off the frame. Pay attention to how it was attached because you have to reattach them to the new frame. The RH LH (right hand/left hand) are marked on the glide and refer to what side of the crisper frame they need to be attached to. Now you should be ready to start on new frame…reattach drawer glides paying attention to RH/LH. Use the screws that you removed earlier. Reattach stainless steel rod and screw back on. Reattach the clear plastic waffle tops to the crisper frame. Don't over think this part. It's easier than you think. Put the frame back in the fridge. Re-insert crisper bins and insert the clear plastic tabs into the stainless drawer glides. Reattach crisper drawer flap tops. Reinsert the glass shelf.