Part Location Diagram of WPW10190929 Whirlpool Ice Mold
See part 9 in the diagram
Replacing your Kenmore Refrigerator Ice Mold
( Grid squares measure 1x1 inch )

Ice Mold

★★★★★
★★★★★
1 Review

Rated by 5 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$165.75
In Stock
Fix Number:
FIX11749915
Manufacturer #:
WPW10190929
Manufactured by:
Whirlpool

Product Description

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

Videos For installing this part.

Replacing your Ice Mold

Replacing your Ice Mold

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 5 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
lisa from Clemmons, NC
Parts Used:
WPW10190929
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Icemaker leaking water when water filling tray
Icemaker was leaking; read other repair scenarios and determined (hoped) the cause of the leak may have been the seal eroding around the heating coil, therefore tried replacing that piece of the Icemaker. I ordered the part from and followed the EXTREMELY helpful video on YouTube provided by this site and the part replacement was successf ul and the Icemaker no longer leaks and is working perfectly. Thank you so much for saving me tons of money!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gilbert from Fayetteville, TX
Parts Used:
WPW10190929
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Ice mold leaked
Followed instructions from the website
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles from Mesa, AZ
Parts Used:
W10297244, WPW10190929
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Ice maker leaking water onto items in freezer
The most difficult was removing ice from tray under ice maker. After getting the ice out of the way it was just a case of sliding the entire unit off the mount. The power connector and mounting bolts were removed and the unit was disassembled. Then the new parts were assembled and the unit was slid back in place. Reinstall mounting bolts and connect power connector. The new ice mold needed a careful washing. before assembly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rodney from Spicewood, TX
Parts Used:
WPW10190929
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Ice Mold
Disassembled the ice maker, cleared all the components. The ice mold was corroded and the finish was coming of into the ice as well as leaking (forming icicles in the freezer). There is no need to turn off the water for this procedure. The primary tool for this is a phillips head screw driver, slender, in order to fit the depth on the bot tom. Remove the side (gear/motor) cover and remove that from the ice mold. Then remove the base housing from the old mold. Again once this done, clean your parts, then ensure that the contact points on the motor are clean and apply contact grease for cold temps to them. Now insert the new mold into the motor and reassemble.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Chuluota, FL
Parts Used:
WPW10190929, EDR5RXD1, WP627985
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
No ice...
Removed the icemaker....one screw on lower right, two rail clips on right and left, and electrical connector. Removed the bottom cover (two screws?). Disengaged the electrical connector. Separated the timer assembly from the ice mold (three screws through the timer assembly into the ice mold). Found one of the two ice mold heater electric al connections with the rubber attached had corroded and separated requiring ice mold replacement. Replaced ice mold with new "plumbers putty" around connections. As a "while I have it apart" fix...replaced the thermostat. Re-assembled.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
4.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    0
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11749915
Manufacturer Part Number: WPW10190929
Brand
Model Number
Description
Kenmore
1061118553
Ice Maker
Kenmore
1061118555
Ice Maker
Kenmore
1062155184
Ice Maker
Kenmore
10641522500
Refrigerator
Kenmore
10641523500
Refrigerator
Kenmore
10641524500
Refrigerator
Kenmore
10641529500
Refrigerator
Kenmore
1064211173
Ice Maker
Kenmore
1064317943
Ice Maker
Kenmore
10644022600
Refrigerator
Kenmore
10644022601
Refrigerator
Kenmore
10644022602
Refrigerator
Kenmore
10644022603
Refrigerator
Kenmore
10644023600
Refrigerator
Kenmore
10644023601
Refrigerator
Kenmore
10644023602
Refrigerator
Kenmore
10644023603
Refrigerator
Kenmore
10644024600
Refrigerator
Kenmore
10644029600
Refrigerator
Kenmore
10644029601
Refrigerator
Kenmore
10644029602
Refrigerator
Kenmore
10644029603
Refrigerator
Kenmore
10644032600
Refrigerator
Kenmore
10644032601
Refrigerator
Kenmore
10644032602
Refrigerator
Kenmore
10644032603
Refrigerator
Kenmore
10644033600
Refrigerator
Kenmore
10644033601
Refrigerator
Kenmore
10644033602
Refrigerator
Kenmore
10644033603
Refrigerator