Overload/ptc - 5 speed

Replaced 5 speed overload and capacitor. the refrigerator started right up and runs great.

First things first, unplug the refrigerator from outlet then using a flat head screw driver to remove the screw of the cardboard cover then using long nose plier remove the clip of the start device then slowly pry the device using the flat head screw driver to remove from the compressor pin (make it sure you're not bending the 3 pin in t ... Read more he compressor) Once already remove? use again the screw driver to pry the black capacitor in order to remove from the old start device/relay(note do not short the capacitor slowly pry side by side never allow the screw driver to touch the 2 capacitor pin it might be still have stored power) then insert it to the new one and install the entire device back to the compressor secure the device with the clip. Before you close up make it sure it working by simply plug it back the refrigerator to the outlet then wait 5 minutes after 5 minutes open the freezer door you should have a cold air by now. If so then put back in place the cardboard cover and your done...