RELAY PTCR

Removed heavy items in refrigerator, protected wood floor with rosin paper, rolled out refrigerator. Unplug the refrigerator. Removed the fan and unplugged it, replaced the capacitor located behind fan (discharged it first using a resistor and wire leads), removed the plastic relay cover off the side of compressor (was tough since it is located in a tight space), unplugged and replaced the relay. To reinstall the plastic cover, I cut a couple small slits in the sides of the plastic cover so it would easily slide down. Reconnected all wires, reinstalled the fan. Plugged in and rolled back into the wall. Was an easy job except getting the plastic cover out. So far the refrigerator is working good!