Part Location Diagram of 5303918277 Frigidaire Replacement Ice Maker
See part 7 in the diagram
Replacing your Frigidaire Refrigerator Replacement Ice Maker
( Grid squares measure 1x1 inch )

Replacement Ice Maker 5303918277

Rated by 15 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$105.32
In Stock
Fix Number:
FIX735469
Manufacturer #:
5303918277
Manufactured by:
Frigidaire

Product Description

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors.

Videos For installing this part.

Replacing your Replacement Ice Maker

Replacing your Replacement Ice Maker

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 15 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Chauncy from Bristol, VT
Parts Used:
5303918277
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Ice Maker stopped working.
The printed instruction that came with it were so small I could not follow the process. My problem was that my original ice maker had the wiring plug directly into it. The replacement had a wire cord coming our of it along with a needed adapter, this made the cord very long. I found a video on youtube that showed exactly how to install it. Once I found that video everything went rather smoothly. The ice maker is now working great.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Montgomery, IL
Parts Used:
5303918277
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
icemaker leaking
it was a straight forward fix!!! I loosened two screws that holds the icemaker in and pulled the plug loose from the connector. they sent an adaptor plug with the icemaker and I didn't need it. I plugged in the connector, set the maker back on the screws(the screw holes are slotted) tightened the screws!!!! took me 15 mins total time. ne w one works great thanks
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
roger from hubbard, IA
Parts Used:
5303918277
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
plastic gears had stripped and would no longer make ice
Very easy install. Loosen two screws, un plug wire connector, lift old ice maker slightly and remove. Install in reverse order. Use a 1/4 in. nut driver on the screws makes it very easy. Installed in less than 15 min.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Roy, UT
Parts Used:
5303918277, WFCB
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Icemaker was leaking
Removed two screws, unplug connector. Plug new ice maker connector in, reinstall screws. Simple.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Douglas from bakersfield, CA
Parts Used:
5303918277
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Leaking water from ice Maker
Easy after watching video on repairing thank you
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Santa Clara, CA
Parts Used:
5303918277
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Icemaker stopped in middle of cycle
Useful tips: 1) 1/4" nutdriver used. Loosen the two screws above the icemaker (by feel), then you can push the entire unit up about 1/2 inch and slip it off of the screws. 2) Make sure the wire harness does not hang under the icemaker, where there is a heater (that can damage the wires); also, make sure the wire harness is not directly a bove the ice reservoir, where the icemaker fingers can catch it and damage it. Use cable ties, and fold it back on itself as needed. 3) To reinstall icemaker, tilt up the back of the unit (so you can see the rear screw hanger); slip that one over its screw; then tilt up the front of the unit, which will now be aligned with its screw. 4) Make sure the water fill tube is aligned correctly -- easy to do, but obviously things won't work right if it's not filling the correct location. 5) Icemaker won't start its cycle until the body cools down enough; for me, it was about 2-3 hours until it started its cycle.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from Temecula, CA
Parts Used:
5303918277
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Freezer wasn't making ice.
I replaced the ice maker although I wasn't sure if that would fix it of if it was the valve/solenoid. The ice maker took about three hours to start making ice and I had already ordered the selonoid. So note to those replacing ice maker, wait a few hours for ice to be made after changing ice maker.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
charles from evansville, IN
Parts Used:
5303918277
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
iCE MAKER STOPPED MAKING ICE
unplugged the ice maker took out two 5/16 hex head screws lifted ice maker out,put in new ice maker, tighten the two screws .
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Bristol, TN
Parts Used:
5303918277
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Ice maker no longer made ice.
Set up my I-pad and followed the on line installation instructions pausing the I-pad at each step to complete that step.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from Katy, TX
Parts Used:
241649003, 5303918277, 240356401
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
ice maker stopped working
with a nut driver loosen 2 screws holding the ice maker in place, disconnect wire harness and remove old ice maker. Put new ice maker on the 2 screws you loosened, tighten screws with a nut driver, connect wire harness...done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX735469
Manufacturer Part Number: 5303918277
Brand
Model Number
Description
Kenmore
25326092100
Freezer
Kenmore
25326093100
Freezer
Kenmore
25331133300
Refrigerator
Kenmore
25331133302
Refrigerator
Kenmore
25331133303
Refrigerator
Kenmore
25331133306
Refrigerator
Kenmore
25331135300
Refrigerator
Kenmore
25331135302
Refrigerator
Kenmore
25331135303
Refrigerator
Kenmore
25331135306
Refrigerator
Kenmore
25331143300
Refrigerator
Kenmore
25331143302
Refrigerator
Kenmore
25331143303
Refrigerator
Kenmore
25331145300
Refrigerator
Kenmore
25331145302
Refrigerator
Kenmore
25331145303
Refrigerator
Kenmore
25331440300
Refrigerator
Kenmore
25331440301
Refrigerator
Kenmore
25331440302
Refrigerator
Kenmore
25331440303
Refrigerator
Kenmore
25331442300
Refrigerator
Kenmore
25331442301
Refrigerator
Kenmore
25331442302
Refrigerator
Kenmore
25331442303
Refrigerator
Kenmore
25331444300
Refrigerator
Kenmore
25331444301
Refrigerator
Kenmore
25331444302
Refrigerator
Kenmore
25331444303
Refrigerator
Kenmore
25331447300
Refrigerator
Kenmore
25331447301
Refrigerator