Frigidaire/Frigidaire_Thumb/UZ8UNEGP.gif
See part 24A in the diagram
Replacing your Frigidaire Refrigerator Ice Actuator play video
( Grid squares measure 1x1 inch )

Ice Actuator

★★★★★
★★★★★
1 Review
$63.94
Fix Number: FIX1526380
Manufacturer #: 241681903
Manufactured by: Frigidaire

Product Description

This is the ice actuator or ice actuator arm for your refrigerator. When you depress the actuator arm with a glass or bucket, ice is normally dispensed. If your current actuator arm is broken, missing, or if the ice dispenser isn’t dispensing ice, you may need to replace it. To access the actuator, you will first need to remove the dispenser assembly, and then remove the actuator from the assembly. Be sure to shut off the water and power source from your refrigerator before you begin this repair.

Videos For installing this part.

Replacing your Ice Actuator

Replacing your Ice Actuator play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 6 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Pamela from Stevens, PA
  • Parts Used:
    241681903
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Piece of plastic broke off of Ice Actuator - ice wouldn't come out of freezer
My husband and I followed the directions on the installation video. They were pretty good, but the man in the video made it look like popping out the ice tray in step one was easy. It was not. By far, this was the hardest part. We were both yanking at the darn thing together, used a putty knife, butter knife and fingers to FINALLY pry it out. Everything else was pretty easy. Oh, and fair warning. Be sure when removing the broken actuator to put it in another far off location. We ended up accidentally putting the busted piece back on. Didn't notice until clean up so we actually got to do the whole repair all over again.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Darla from Moline, IL
  • Parts Used:
    241681903
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
ice wouldn't come out the dispenser door
I had my Son fix it. He unscrewed 6 screws and replaced it very quickly. A little piece of plastic broke off. Having taken the piece off already, it was very fast to put the new one on. Under 15 minutes. He had me hold the little door out of his way while screwing in one of the screws. Thanks for supplying the part.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    ROBERT from LAWTON, OK
  • Parts Used:
    241681903, 241678703
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
ice actuator would not dispense ice as the little lever on it was broken off thats pushes on the ice actuator switch
The repair was fairly easy , however mine didn't have the same wire harness as the video showed, and there isn't much room when pulling out the water line and especially putting in back in, but after a few deep breathes I was successful and all is working great, so thanks guys I appreciate the instruction video and the correct parts.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Dale from Springfield, IL
  • Parts Used:
    241681903
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
had trouble getting the water tube reinstalled
Using a small Philips screwdriver inserted through the opening placed tube over the blade and used it to guide the tube through the hole.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Maurice H from Schreveport, LA
  • Parts Used:
    241681903
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Ice Actuator would not function and could not get ice cubes.
Moved refrigerator away from where is set and unplugged it for safety. Removed front panel and disconnected plug-in connector by lifting lock tab and pulling it apart. Then removed top series of screws holding mechanism in place. Finally moved bottom series of screws after removing drip pan. These screws were slightly rusted and oiled them before reinstallation. Next removed electrical connector by lifting locking tab and pulling it apart. Entire panel with broken part is now in my hand. Removed tabs holding pivot arms (one was broken off) and removed part. Reinserted new part by placing upper control pins on top of actuating levers designed onto part. Secured two arms into slots with tabs previously removed. Then reassembled electrical connectors. Tabs naturally locked into place . Fastened top three screws, then bottom screws now lubricated. Inserted water line through opening with pliers. Almost fit naturally onto place! Installed front panel. Ice maker had locked up with long delay in obtaining part before we determined where to get it! Ordering part was easy with model number of Refridgerater. It arrived in two days. Cleared ice jam by removing entire container and melted ice jam. Reinstalled box and added fresh Ice. Tested it and it worked fine. Saved $$$ in the process! Thanks!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    ed from Saint George, UT
  • Parts Used:
    241681903
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
broken ice maker actuator
Just like the video, except my circuit board did not have a harness connector for easy unplugging. My solution was to reinforce the circuit ribbon with nylon strapping tape so the circuit ribbon would not be damaged as it hung from its plastic trim. I did want to commend for their You Tube videos which make it possible for me to take on the repair. Also, they are a fine company with fast shipping, reasonable prices and a good website to check order status etc. They do things right.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
4.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    0
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Compatibility
This part works with the following models:
Fix Number: FIX1526380
Manufacturer Part Number: 241681903
Brand
Model Number
Description
Kenmore
25354703400
Refrigerator
Kenmore
25354703401
Refrigerator
Kenmore
25354703402
Refrigerator
Kenmore
25354703403
Refrigerator
Kenmore
25354703404
Refrigerator
Kenmore
25354703405
Refrigerator
Kenmore
25354703406
Refrigerator
Kenmore
25354703407
Refrigerator
Kenmore
25354703408
Refrigerator
Kenmore
25354703409
Refrigerator
Kenmore
2535470340A
Refrigerator
Kenmore
25354713500
Refrigerator
Kenmore
25354713502
Refrigerator
Kenmore
25356943600
Refrigerator
Kenmore
25356953600
Refrigerator
Frigidaire
BFHS2611LM0
Refrigerator
Frigidaire
BFHS2611LM1
Refrigerator
Frigidaire
BFHS2611LM2
Refrigerator
Frigidaire
CRSE234FB0
Refrigerator - Side-by-side
Frigidaire
CRSE234FB1
Refrigerator - Side-by-side
Frigidaire
CRSE234FB2
Refrigerator - Side-by-side
Frigidaire
CRSE234FB3
Refrigerator - Side-by-side
Frigidaire
CRSE234FB4
Refrigerator - Side-by-side
Frigidaire
CRSE234FSM0
Refrigerator - Side-by-side
Frigidaire
CRSE234FSM1
Refrigerator - Side-by-side
Frigidaire
CRSE234FSM2
Refrigerator - Side-by-side
Frigidaire
CRSE234FSM3
Refrigerator - Side-by-side
Frigidaire
CRSE234FSM4
Refrigerator - Side-by-side
Frigidaire
CRSE234JB0
Refrigerator - Side-by-side
Frigidaire
CRSE234JB1
Refrigerator