We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
VALENTINA
December 6, 2023
Hi,
I found the door seals that I need but just wanted to make sure that I am buying seals for both doors. And also wanted a quote for installing them. Thanks
For model number B22CT80SNS01
Hello Valentina, Thank you for your inquiry. We show the door seals are sold individually. We apologize but Fix.com is a do it yourself parts distributer only, we do not send technicians out to install the part. To install the part, simply peel off the old seal, and clean the sealing area. Align the new seal along the door perimeter and press it firmly into place to create a tight seal. You may need to soak the gasket in warm water or throw it in the dryer for 10 minutes to make the gasket flexible. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.3 / 5.0, 1 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My gasket was torn beyond repair and it prevented the door from closing properly.
Step 1: remove new gasket from box and spread out on flat surface. Step 2: use hair dryer to gently heat the gasket and reshape it back to a rectangle. Step 3: when your new gasket is warm and shaped like the door, remove the old gasket and wipe down the door with a damp rag. (If the door is really dirty now is the time to cle
... Read morean it) Step 4: start with a corner and press the gasket into place. Making sure the magnetic strip/flap side is on the out swing of the door. Note: If the gasket is very warm and loose you may have a little extra when you reach each corner. Just press the gasket into the corner and go back around the entire door pressing in evenly.
Read less
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX9492801
Manufacturer Part Number: 00713448
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.