Maytag/Maytag_Thumb/44968.gif
See part 2 in the diagram
Replacing your Whirlpool Range Drip Bowl - 6 Inch play video
( Grid squares measure 1x1 inch )

Drip Bowl - 6 Inch

★★★★★
★★★★★
1 Review
$ 15.84   In Stock
Fix Number: FIX2366565
Manufacturer #: W10196406RW
Manufactured by: Whirlpool

Product Description

This part has been substituted by the manufacturer and now has a hole in the center. This Drip Bowl is an OEM approved replacement part designed for use with various models of electric ranges and cooktops manufactured by Whirlpool, Amana, Magic Chef, Maytag, Roper, Caloric, Crosley, Admiral, Hardwick, Norge, Litton, Kenmore, KitchenAid, Hoover, Jenn-Air, Inglis, Estate, and Glenwood. For full compatibility, please see the "Model Cross Reference List" below. This Drip bowl fits under 6" burner elements, and has a diameter of approximately 8". While the replacement may be visually different from the original, it will fit your appliance. If your Drip Bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. Each Drip Bowl is sold individually, and may also be referred to as a Drip Pan. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Videos For installing this part.

Replacing your Drip Bowl - 6 Inch

Replacing your Drip Bowl - 6 Inch play video

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 14 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    chris from ABERDEEN, SD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Robert from Boston, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Range surface burner not working properly
Pulled out the old burner and slipped in the new one. Also replaced burner drip bowls. Pulled out the burners, took out old bowls, replaced with new bowls, slipped back burners. All fit perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface elements were uneven and drip bowls were damaged.
I was the person that ordered parts - not the person that installed parts. All parts were easily installed except for the 6" surface element. The problem appears to be more internal and not with this part, so we will have to return the 6" surface element. Installing this 6" element still left the burner uneven.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kim from Matthews, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Coils were uneven drip pans were corroded
This is a drop in stove. Turned off power at breaker. Pulled the coils and drip pans to access screws holding the top on. Lifted top and unscrewed old block kit. Replaced block kit and secured it. Screwed down the top and installed new drip pans. Reinserted coils and reset power. All good.
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Diedra from Elkhorn city, KY
  • Parts Used:
    W10196406RW, W10196405RW
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
All 4 Drip bowls had rusted out .
I watched How To Video and followed instructions. Very simple very easy !
0 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Peggy from Baton Rouge, LA
  • Parts Used:
    W10196406RW, W10196405RW
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Replacing drip pans
Unplugged and removed burner coils, inserted new pans and plugged coils back in
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Marie from Springfield, MO
  • Parts Used:
    W10196406RW, W10196405RW
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
old, stained and rusty drip bowls
simply unplugged the burners, removed existing drip bowls, cleaned stove top and inserted new bowls
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    George from Lyman, ME
  • Parts Used:
    W10196406RW, W10196405RW
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Replacement of old drip bowls
Made sure the range top was off and totally cool. Removed each of the four range cooking coils. Removed all four drip bowls. Cleaned all around the bowl openings, installed all four new bowls and old cooking coils. Used a Dremel with a wire brush to really clean around the SS range top, along with oven cleaner.This is the 3rd time I have done this. This range top is SS but over 30 years old. My wife thinks we got a new range everytime I do this.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dip pans rusted & had 2 wron types of elements
Removed & replaced them.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX2366565
      Manufacturer Part Number: W10196406RW
      Brand
      Model Number
      Description
      Kenmore
      101936630
      Range - Kenmore Range/Stove/Oven Model 101.936630 (101936630, 101 936630) Parts
      Kenmore
      101936634
      Range - Kenmore Range/Stove/Oven Model 101.936634 (101936634, 101 936634) Parts
      Hoover
      1151AJ-30
      Cooktop
      Admiral
      1151AL-30
      Cooktop
      Hoover
      1151WJ-30
      Cooktop
      Admiral
      1151WL-30
      Cooktop
      Magic Chef
      1500PAA
      Range
      Magic Chef
      1500PAW
      Range
      Magic Chef
      1500PRA
      Range
      Magic Chef
      1500PRW
      Range
      Magic Chef
      15GA-1
      Range
      Magic Chef
      15GA-1-94
      Range
      Magic Chef
      15GA-1-GG
      Range
      Magic Chef
      15GN-1
      Range
      Magic Chef
      15GN-1-94
      Range
      Magic Chef
      15GN-1-GG
      Range
      Magic Chef
      15GY-1
      Range
      Magic Chef
      15GY-1-GG
      Range
      Magic Chef
      15HA-10
      Range
      Magic Chef
      15HA-10-94
      Range
      Magic Chef
      15HA-10-GG
      Range
      Magic Chef
      15HN-10
      Range
      Magic Chef
      15HN-10-94
      Range
      Magic Chef
      15HN-10-GG
      Range
      Magic Chef
      15HY-10
      Range
      Magic Chef
      3500PPA
      Range
      Magic Chef
      3500PPW
      Range
      Magic Chef
      3500PPW-D
      Range
      Magic Chef
      3500SPA
      Range
      Magic Chef
      3500SPW
      Range