11749737-2-M-Whirlpool-WPW10181986-Oven Sensor

( Grid squares measure 1x1 inch )

11749737-1-S-Whirlpool-WPW10181986-Oven Sensor

11749737-2-S-Whirlpool-WPW10181986-Oven Sensor

11749737-1-S-Whirlpool-WPW10181986-Oven Sensor 360 view

Oven Sensor

★★★★★

1 Review

Rated by 5 customers

Really Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$94.68

Fix Number: FIX11749737

Manufacturer #: WPW10181986

Manufactured by: Whirlpool

Product Description

This genuine OEM part is a replacement sensor for your oven. The sensor works with the control board to measure and regulate the temperature in your oven. If the sensor has become defective, the temperature in the oven can fluctuate and read inaccurately. Other symptoms you may experience are little to no heat, or the oven getting too hot. The displayed temperature and the actual temperature can be off by over 50 degrees if the sensor is not working properly. You can use a multimeter to test if the oven sensor is faulty, and if so, it should be replaced. Please be sure to disconnect the power supply to your range before beginning this repair.
Works with the following brands

Whirlpool, Maytag, Kenmore, Amana
Works with the following products
Range
Fixes the following symptoms

Little to no heat when baking, Oven is too hot, Oven not heating evenly, Will Not Start
Part Number Cross Reference

Part# WPW10181986 replaces these:

AP6016450, 8273902, W10131826, W10181986, WPW10181986VP

2 Installation Videos 1 Question and Answer

5 Installation Instructions

1 Customer Review Model Compatibility

Product Description Part Videos Questions and Answers Installation Instructions Customer Reviews Model Compatibility

Product Description

This genuine OEM part is a replacement sensor for your oven. The sensor works with the control board to measure and regulate the temperature in your oven. If the sensor has become defective, the temperature in the oven can fluctuate and read inaccurately. Other symptoms you may experience are little to no heat, or the oven getting too hot. The displayed temperature and the actual temperature can be off by over 50 degrees if the sensor is not working properly. You can use a multimeter to test if the oven sensor is faulty, and if so, it should be replaced. Please be sure to disconnect the power supply to your range before beginning this repair.

Works with the following brands:

Whirlpool, Maytag, Kenmore, Amana
Works with the following products:
Range
Fixes the following symptoms:

Little to no heat when baking, Oven is too hot, Oven not heating evenly, Will Not Start
Part# WPW10181986 replaces these:

AP6016450, 8273902, W10131826, W10181986, WPW10181986VP

Videos For installing this part.

Replacing your Oven Sensor

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Ross

February 23, 2023

bake element burned out and small fire, after excitement, replaced bake element, no joy. Checked power, no breakers popped, surface and control works fine. Replaced thermostat still no bake, broil element heats fine. Checked thermal fuse, not blown. At wits end. Convection fan works fine.

For model number Matag MER8775AS0

Hi Ross, thank you for reaching out. We would recommend checking to see if you have installed the bake element correctly or not. If this is not the issue, then you may need to check the following parts: oven sensor, part number FIX11749737, terminal block, part number FIX11750972, and wire harness, part number FIX12578055. We hope this sorts out your problem!

Was this helpful?

Related Parts:

HARNS-WIRE

$132.69

Terminal Block

$34.09

< Prev
1
Next >

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 5 reviews.

< Prev
1
Next >

Sort by:

Customer:

john from midland, NC
Parts Used:
WPW10308477, WPW10181986
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

THE OVEN WAS 10 DEGREES OFF,NOT REACHING PROPER TEMPRETURE.

THE PROBLEM I HAD COULD HAVE BEEN TWO THINGS.SO AT THE PRICE OF THE TWO THINGS WAS A GREAT PRICE.SO I INSTALLED THE TWO PARTS. PULL THE STOVE AWAY FROM THE WALL.MAKE SURE TO UNPLUG THE CORD FROM THE WALL OUTLET.ONLY TOOL YOU NEED IS A PHILLIPS SCREW DRIVER.UNCREW THE TWO SCREW.MAKE SURE TO HOLD THE WIRE LEADS BECAUSE THEY CAN FALL INTO THE INSTULATION.PULL THE TWO LEADS OFF AND THEN REPLACE THE NEW LEADS OF THE NEW ELEMENT.PUT THE TWO SCREWS BACK IN AND THATS IT FOR THE ELEMENT.WITH THE SENSOR IS EASY.THE BACK OF THE STOVE HAS ABOUT 10 SCREWS ON THE BACK OF THE STOVE.UNSCREW ALL THE SCREWS,REMOVE THE BACK COVER AND UNSCREW THE TWO SCREW,THEN UNPLUG THE SENSOR CONNECTING LEAD.REPLACE THE NEW SENSOR,AN THEN REPLACE THE SCREWS,REPLACE THE BACK COVER,REPLACE THE SCREWS.PLUG THE STOVE INTO THE WALL SOCKET.TURN THE STOVE ON,THEN SET THE TEMPRETURE AND YOU REPAIRED YOUR STOVE WITH THE PROPER OVEN TEMPRETURE. THANK YOU.

5 of 6 people found this instruction helpful.