See part 16 in the diagram
( Grid squares measure 1x1 inch )
Bake Igniter
$55.95
In Stock
Fix Number: FIX11747217
Manufacturer #: WP9758079
Manufactured by:
Whirlpool
-
Product Description
This is a genuine OEM replacement igniter for the bake element in your gas range. This part is used to ignite the gas in order to light the oven burner. If you find that your oven will not start, there is little to no heat, or the igniter glows but will not light, then you should replace this part. Another sign the igniter may be faulty is if you can hear it clicking, but it will not light. Please be sure to disconnect the power and gas supply to your range before beginning this repair.
-
Works with the following brandsWhirlpool, Maytag, Kenmore, Amana
-
Works with the following productsRange
-
Fixes the following symptomsWill Not Start, Little to no heat when baking, Gas igniter glows, but will not light
-
Part Number Cross ReferencePart# WP9758079 replaces these:AP6013984, 9758079, WP9758079VP
Product Description
This is a genuine OEM replacement igniter for the bake element in your gas range. This part is used to ignite the gas in order to light the oven burner. If you find that your oven will not start, there is little to no heat, or the igniter glows but will not light, then you should replace this part. Another sign the igniter may be faulty is if you can hear it clicking, but it will not light. Please be sure to disconnect the power and gas supply to your range before beginning this repair.
-
Works with the following brands:Whirlpool, Maytag, Kenmore, Amana
-
Works with the following products:Range
-
Fixes the following symptoms:Will Not Start, Little to no heat when baking, Gas igniter glows, but will not light
-
Part# WP9758079 replaces these:AP6013984, 9758079, WP9758079VP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Fred from Manassas, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Bake and Broil Igniters did not work
Removed the following: baking racks, bottom cover (2 screws at rear), and metal plate that covers the burner. Removed two screws that held igniter in place, removed old igniter and replaced it with new igniter. Repeated same steps for the broiler igniter. Installed the 3 items mentioned above in reverse order.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Don from HARRISON, MI
-
Parts Used:WP9758079
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Wouldn't stay warm
It was easy
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Linford from BRONX, NY
-
Parts Used:WP9758079
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Oven flame would not ignite.
The igniter was not the problem.Item #: 1937904
Description: Spark Module was necessary. The problem was diagnosed by the technician from Whirlpool. Cost $120. Then is purchase the part and installed it myself.
Description: Spark Module was necessary. The problem was diagnosed by the technician from Whirlpool. Cost $120. Then is purchase the part and installed it myself.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Yvona from Waterloo, IL
-
Parts Used:WP9758079
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
would shut off after a while and stay off nothing got cooked
open the oven door took out the bottom plate after removing two screws in back ,unscrewed the heat plate and removed the old igniter and replaced the new one and put it all back together and it work great thank you.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Christina from Surprise, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
my oven did not kept the temperature it kept getting colder
My husband did the work first he replaced the sensor it was really easy we both watch the how to videos and after that he started removing screws, two screws to be exact pull the sensor out unplugged it put the new sensor plugged it in put screws back about 10 minutes or less. After that he started in the oven he removed the bottom pan removed some screws removed the old igniter he did have a hard time removing one screw it was underneath the igniter but once he got out the rest was really easy thanks to the videos and your help my stove now works better than before thank you for your help
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Charles from Washington, DC
-
Parts Used:WP9758079
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
Our oven would sometimes light and sometimes not light
All the burners and the broiler worked fine so I determined that the igniter was in need of replacement. I unplugged the stove and turned off the gas. I took out the oven racks, the bottom panel of the oven, and the heat shield. I then unscrewed the mounting bracket and took out the old igniter. I replaced with the new igniter and reinstalled into the oven. I replaced all the parts and plugged in the oven and turned the gas on. On the first attempt the oven lit and has been working great.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Daniel L from Hayward, WI
-
Parts Used:WP9758079
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Oven would initially ignite but not hold temperatures of 350 and under
Logically, I first replaced the thermostat (another easy repair), but that did not solve the problem. This igniter replacement is much easier when the door is removed first (remove nearly invisible locking clips at top of hinge openings, insert pin/nail/allen wrench in hole in each fully-open hinge before removing to make replacing the door easier. I just saved you about 30 minutes). Remove racks. Turn out 2 knurled set screws at back of oven floor almost fully (about 1 1/2 inches), and remove 2 screws at front of floor. Slide floor toward you and lift out, noting where front and rear tabs go. Remove screw at back of oven that holds burner in place and lift out. Remove 2 screws holding igniter to burner assembly, and carefully slide off (tight) wire at bottom of igniter. Throw away the old igniter, grab the new one and reverse all the steps. If you want to make your wife even happier than she'll be with an oven that works again, this is a good time to disassemble the door and clean out all that greasy accumulated junk before remounting the door. That is not included in the 15-30 minute repair time.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Richard from Smyrna, NC
-
Parts Used:WP9758079
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Oven would not come on.
The diagram and repair instructions were easy to find . The Bake Igniter (PS898618) the L shaped one I needed took a bit of searching. thanks to a previous repair story I was able to find it. Your good service and fast delivery was great. Tks Richard
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11747217
Manufacturer Part Number: WP9758079
Manufacturer Part Number: WP9758079
Brand
Model Number
Description