OEM Whirlpool Range Bake Element [W10779716] | Ships Today | Fix.com
https://fixcom.azureedge.net/Schematics/Whirlpool/4WPIGL0F.gif
See part 7 in the diagram
( Grid squares measure 1x1 inch )
https://fixcom.azureedge.net/Schematics/Whirlpool/4WPIGL0F.gif

Bake Element

2 Reviews
Your Price
$65.26

Fix Number: FIX11703285

Manufacturer #: W10779716

Manufactured by: Whirlpool

Part description

This element is square shape with terminals in the center.

Works with the following brands

Whirlpool, Maytag, KitchenAid, Jenn-Air, Kenmore

Works with the following products

Range

Fixes the following symptoms

Element will not heat | Little to no heat when baking | Oven not heating evenly

Videos For installing this part.

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 4.8 / 5.0, 3 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jefffrey from EATON, OH
Parts Used:
W10779716
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Element stopped working
Disconnected power, removed oven pan that covered element, took off back panel of stove that covered the wiring, disconnected the wires, unscrewed bracket in oven. Removed element then did everything in reverse order.
2 of 2 people found this instruction helpful.
Were these instructions helpful?
Customer:
Steven from MILWAUKEE, WI
Parts Used:
W10779716
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
oven would not heat up
disconnected plug remove bottom tray replace heating element
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Sandra from Chattanooga, TN
Parts Used:
W10779716
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
element burned out
Unplug range.Take all the racks out. Unscrew 2 screws holding cover plate down. Take out one screw holding element to back of oven wall and 2 screws holding it to the floor of the oven. Remove 2 screws holding middle cover plate on back side of range. Remove two leads on heating element. Remove element. Install new element and plug the leads to ends. Replace back cover. Replace screws holding element to oven. Replace element cover. Voila!
1 person found this instruction helpful.
Were these instructions helpful?

Customer Reviews

Average Rating (2 Reviews):
5
out of 5
Filter By Rating:
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

This part works with the following models:

Fix Number: FIX11703285
Manufacturer Part Number: W10779716
Brand
Model Number
Description
Kenmore
664C95123610
Range - ELECTRIC SLIDE
Kenmore
66542783710
Range - SLIDE
Whirlpool
IEL730CS0
Range - ELECTRIC SLIDE IN RANGE
Whirlpool
IEL730CS1
Whirlpool
IEL730CS2
Range
Jenn-Air
JDS1450CDP0
Range - SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS1450CDP1
Range - SLIDE
Jenn-Air
JDS1450CDS0
Range - SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS1450CDS1
Range - SLIDE IN DUAL FUEL RANGE
Whirlpool
JDS1450CFP0
Whirlpool
JDS1450CFS0
Jenn-Air
JDS1450DP0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1450DP1
Range - DUAL FUEL RANGE
Jenn-Air
JDS1450DS0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1450DS1
Range - DUAL FUEL RANGE
Whirlpool
JDS1450FP0
Whirlpool
JDS1450FS0
Jenn-Air
JDS1750CEP0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1750CES0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1750EB0
Range - RANGE
Jenn-Air
JDS1750EB1
Range - SLIDE
Jenn-Air
JDS1750EP0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1750EP1
Range - SLIDE
Jenn-Air
JDS1750ES0
Range - RANGE
Jenn-Air
JDS1750ES1
Range - SLIDE
Jenn-Air
JDS1750FB0
Range - SLIDE
Jenn-Air
JDS1750FP0
Range - SLIDE
Jenn-Air
JDS1750FS0
Range - SLIDE
Jenn-Air
JES1450CDB0
Range - ELECTRIC RANGE
Jenn-Air
JES1450CDB1
Range - ELECTRIC SLIDE