Range Bake Igniter WP74007399
$103.84
Special Order
- Fix Number:
- FIX11744176
- Manufacturer #:
- WP74007399
- Manufactured by:
- Whirlpool
Jump to:
Product Description
This part ignites to help bake your food.
-
Works with the following brands:Maytag
-
Works with the following products:Range
-
Fixes the following symptoms:Little to no heat when baking, Will Not Start, Gas igniter glows, but will not light
-
Part# WP74007399 replaces these:74007399
- Works with the following brands:
- Maytag
- Works with the following products
- Range
- Fixes the following symptoms
- Little to no heat when baking, Will Not Start, Gas igniter glows, but will not light
- Part# WP74007399 replaces these:
- 74007399
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Thomas from Jacksonville, AL
- Parts Used:
- WP74007399
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Upper Oven bake unit would not light
I removed the door by opening 1/4 of the way and lifting the door off. I then removed the two screws at the front of the burner cover - slide the cover toward you and lift up to remove - next remove the two wingnuts to remove the flame disperser - then remove the screws at the front and rear of the burner and gently rotate the burner so
... Read more
the igniter can be removed. Remove the igniter from the burner and then remove the wiring cover. Gently tug the cable until the plug is exposed - uplug the old and plug in the new. After you reinstall the wire cover and the burner assembly - turn on the bake cycle to make sure the igniter glows. Once it glows and while smiling, install the flame disperser, burner cover and door. 10-15 minutes have elapsed, you're smiling and the oven now works :-)
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11744176
Manufacturer Part Number: WP74007399
Manufacturer Part Number: WP74007399
| Brand | Model Number | Description |
|---|---|---|
| Maytag | MGR6772BDB | Range - Freestanding, Gas |
| Maytag | MGR6772BDQ | Range - Freestanding, Gas |
| Maytag | MGR6772BDS | Range - Freestanding, Gas |
| Maytag | MGR6772BDW | Range - Freestanding, Gas |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.