We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelly
August 29, 2025
What is te width of this part?
For model number CHE9830BCE
Hi Kelly, thank you for reaching out. The bake element you mentioned is 19 1/4 inches wide. We hope this information is useful!
Was this helpful?
Thank you for voting!
Kelly
August 29, 2025
Your website gave the terminal depth of Oven Bake Element WP74003019, but please tell me the width of the element (side to side measurement. I just want to be sure that it is the right one for my oven. My oven is Maytag Model CHE9830BCE. Please confirm that your Oven Bake Element WP74003019 is the right one for my oven. Thank you!
For model number CHE9830BCE
Hi Kelly, thank you for reaching out. The bake element, part number FIX11744014, is compatible with your model. Its width is approximately 19 inches. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.9 / 5.0, 23 reviews.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven element had actually melted when it had been turned on.
followed what the repair video had showed by taking out the two screws and unhooked the wires and plugged in the new element, replaced the screws and done. turned the oven on and cooked dinner right away. saved a big repair bill to a serviceman and service trips, one to come out and check the range and one to replace the element. probably
... Read more around $200.
Heating element in electric stove oven broke in 2 pieces.
Ordered part which was delivered in 3 days. Called son to come and install. 7 days later son came to repair. I had watched video on how to install so I supervised(kibbitzed). He shut power off at fuse box, removed element with a screw driver, used pliers to release connection and then reversed procedure, installing the element. It took ab
... Read moreout 9 minutes. Were I younger than 82 and could bend and reach, I could have done it myself. Back to baking.
lower element would not funtion, stove would not heat
Pull range out from wall far enough to unplug it.( to do this, lift up on the front of the oven about 1 inch while pulling out)Unplug range (if range is hard wired and there is no plug, push stove back in and turn the appliance off at the breaker, test to make certain there is no electricity to the appliance before continuing. Use electri
... Read morec tester to make sure there is no electricity..or else you will be shocked with 220 volts. Remove oven racks. Remove the 2 Phillips screws at back lower left and right sides. Pull element out 2 inches, enough to see the wiring and friction fit clips attached to element. Detach clips from element. Remove old element. Install new element. Re-attach friction fit clips to element. Screw Phillips head screws to hold element in place. Replace oven racks. Close door. Plug stove back in, or turn breaker back on. To test, turn selector to oven, turn oven temp. to 350 degrees. See the new element glow bright red. Push range back in. You've just completed the install.
Pulled the stove from the cabinets, unplugged stove from electrical outlet. Removed back cover. Removed two Philips-head screws inside oven and removed element. The male terminal ends of the oven element were 'burnt' and fell apart as I removed the heating element from the oven. At the backside of the stove, the female 1/4-inch electrical
... Read more connectors were 'burnt' as well. I replaced the old female connectors, making sure they were 'crimped' tightly. I then installed the replacement oven element, and tightened the retains screw, firmly. I replaced the back cover, plugged in the power, wiggled the stove back into place, and baked oatmeal raisin cookie for New years Eve.
Replacement really simple. Remove two screws to release the element and then just pull the wire clips off each end. Then place wire clips back on the new element push element back in place. Line up the screws and tighten them. Job done and working. Price was very reasonable and received fedex in 3 days. Highly recommend this site
I removed both racks out of the oven. Used a phillips screw driver to remove the two retaining screw and pulled the element out. I disconnected the two attached wires from broken heating element. I then hooked up the two attached wires to the new heating element, pushed back in, installed retaining screws, and replaced oven racks. It took
... Read more longer to open the box on the new element then it did to do the whole job!
Baking element is attached to the back of the oven. Remove the 2 Phillips screws and save them. Softly pull the element and unplug the electrical connectors. Remove the old element and discard. Plug in the electrical connectors to the new baking element and secure it to the back of the oven reusing the previously saved Phillips screws. Te
... Read morest . Done!
The bake element cracked due to age and use I suppose.
Pulled out the oven from the wall and unplugged it. Opened oven door, unscrewed the left and right screws. Pulled the element out slowly. Located and disconnected the electrical fittings on either side. Inserted the new element, reconnected electrical fittings. Guided the fittings and wire back into their holes and reinstalled screws. Pre
... Read moretty daen easy.
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joseph T - August 26, 2021
Verified Purchase
cooks better in one piece
it is just as advertised, easy to install
★★★★★
★★★★★
Crystal C - January 28, 2021
Verified Purchase
Exact part and quick shipping
This saved us a ton of money - we were able to change the element and not have to buy a new stove. Exact part match and got it within a few days.
Model Compatibility
This part works with the following models:
Fix Number: FIX11744014
Manufacturer Part Number: WP74003019
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.