PANEL Assembly BONDED LWR(Stainless Steel) WB56X20026
Works With Model PCB950SF2SS!
$342.38
Special Order
- Fix Number:
- FIX8755511
- Manufacturer #:
- WB56X20026
- Manufactured by:
- GE
Works With Model PCB950SF2SS!
Jump to:
Product Description
-
Works with the following brands:General Electric
-
Works with the following products:Range
- Works with the following brands:
- General Electric
- Works with the following products
- Range
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- DAVID from CENTERVILLE, UT
- Parts Used:
- WB56X20026
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Mother In Law Fell Into Lower Door, Shattering Fascia
Pulled the oven away from the wall, then rotate/tilt the range/oven at 6 inches of clearance from floor to bottom of door,use lift blocks to hold that position. Using t20 torx, removed 4 bottom torx screws and 2 inside top corner screws. Fascia is now off. Remove handle, 4 torx long screws. Remove surrounding metal support by remo
... Read more
ving with 1/4 nut-driver 2 screws each side along bottom. Do not throw away plastic spacers/isolators, they will be needed for reinstall. Throw away shattered fascia, clean up all glass. Next reinstall metal frame with the four screws with the nutdriver, please reinstall the plastic spacers/isolators between glass panel and metal frame. Next reinstall the handle with 4 long torx screws. Now align the fascia cover with the oven door while its open. Reinstall top 2 torx screws. Now, proceed to bottom of door to reinstall 4 torx screws. Remove lift blocks, push oven back in its home. That's it, done. . . Easy.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX8755511
Manufacturer Part Number: WB56X20026
Manufacturer Part Number: WB56X20026
| Brand | Model Number | Description |
|---|---|---|
| General Electric | JB850SF1SS | Range |
| General Electric | JB850SF4SS | Range - ELECTRIC RANGE |
| General Electric | JB870SF1SS | Range |
| General Electric | JB870SF2SS | Range - ELECTRIC RANGE |
| General Electric | JB870SF4SS | Range - ELECTRIC RANGE |
| General Electric | JCB850SF1SS | Range |
| General Electric | JCB850SF4SS | Range - ELECTRIC RANGE |
| General Electric | PB950SF1SS | Range |
| General Electric | PB950SF2SS | Range - ELECTRIC RANGE |
| General Electric | PB950SF4SS | Range - ELECTRIC RANGE |
| General Electric | PB955SF1SS | Range - ELECTRIC RANGE |
| General Electric | PCB950SF1SS | Range |
| General Electric | PCB950SF2SS | Range |
| General Electric | PCB950SF4SS | Range - ELECTRIC RANGE |
| General Electric | PS950SF1SS | Wall Oven - General Electric Range |
| General Electric | PS950SF2SS | Range - ELECTRIC RANGE |
| General Electric | PS950SF3SS | Range - ELECTRIC RANGE |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.