249424-1-M-GE-WB44X200 -Bake Element - 240V
Part Location Diagram of WB44X200 GE Bake Element - 240V
See part 650 in the diagram
249424-1-S-GE-WB44X200 -Bake Element - 240V 360 view
( Grid squares measure 1x1 inch )
249424-1-S-GE-WB44X200 -Bake Element - 240V 249424-2-S-GE-WB44X200 -Bake Element - 240V 249424-3-S-GE-WB44X200 -Bake Element - 240V 249424-1-S-GE-WB44X200 -Bake Element - 240V 360 view
Part Location Diagram of WB44X200 GE Bake Element - 240V

Bake Element - 240V WB44X200

Works With Model JMP264D1!
★★★★★
★★★★★
1 Review

Rated by 41 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$48.21
In Stock
Fix Number:
FIX249424
Manufacturer #:
WB44X200
Manufactured by:
GE
Works With Model JMP264D1!

Jump to:

Product Description

This part is located in the bottom of your appliance and is what supplies the heat for cooking and baking. If your oven or range has no heat coming from the element or is not heating evenly, you may need to replace the element. This repair is considered to be of medium difficulty and requires the use of a screwdriver. Other items that may help with your repair are a flashlight, and wooden clothes pins (to prevent the wires from falling back into the oven). This kit comes with two installation screws and the 240 volt bake element, which is a black metal piece approximately 13 inches wide and 16.5 inches in length. Ensure that you unplug the appliance or shut off the circuit breaker before beginning. Removing the oven racks, and even the oven door can help make accessing the bake element easier.

  • Works with the following brands:
    General Electric, Hotpoint
  • Works with the following products:
    Range, Wall Oven, Microwave Oven Combo
  • Fixes the following symptoms:
    Little to no heat when baking, Element will not heat, Oven not heating evenly, Will Not Start
  • Part# WB44X200 replaces these:
    AP2031031, 3267, WB44X200, WB44X0200, WB44X160, WB44X200R
Works with the following brands:
General Electric, Hotpoint
Works with the following products
Range, Wall Oven, Microwave Oven Combo
Fixes the following symptoms
Little to no heat when baking, Element will not heat, Oven not heating evenly, Will Not Start
Part Number Cross Reference
Part# WB44X200 replaces these:
AP2031031, 3267, WB44X200, WB44X0200, WB44X160, WB44X200R

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$20.71
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 41 reviews.
  • 1
  • 2
  • 3
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
greg from incline village, NV
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
30 year old bake element went south
Screws out, new ones in, done. The only thing I'll add which had me concerned was that the element photo shown on the one inch grid didn't show the mounting screws at 3.5" on center which is what my oven had. Fortunately, the picture notwithstanding, the new part was punched at 3.5" so it went right in.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Denison, TX
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Element burned into on back left corner and element flamed up
Shut off breaker to oven and remove oven racks. Use nut driver to remove two screws on the plate at back of the oven. Carefully pull the element forward to expose the two screws that attach element to oven wires. Place forcepts or clothes pin on the oven wires to prevent them from slipping back into the oven wall. Remove the two screws an d remove old element - reverse the process to install new element. When the old element has been removed, it provides an excellent opportunity to clean the oven with no obstructions before installing the new element. Easy job.
Read less
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glenn from Marietta, GA
Parts Used:
8009, WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Non functioning oven element
Removed four screws and re-attached ne element which worked immediately.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Celeste from Portsmouth, RI
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
baking element fried with flames
Kill power to oven by the circuit breaker and padlock it out so no one else can turn it on while you are working on the oven. Remove shelf units so you can comfortably reach the back of the oven. Unscrew 2 screws holding the bottom baking element to the oven back. Put lock pliers on each wire (so they don't go back into the wall). Remo ve 2 screws holding wires to element. Replace element. Replace two screws holding wires to element. Feed wires back into insulated back of oven so they don't get crimped. Attach new element with 2 screws to back of oven. Turn electricity back on. Test element.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MICHAEL from THE DELLES, OR
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Element burned in half
Turn off the breaker. Remove back wall hex screws. Pull old element slightly forward. Unscrew power screws. Put new element in and attach power back with screws. Reattach to back wall. Make sure plenty of fiberglass in there... I didn't need to add any. Very small gap is okay.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from Newman, CA
Parts Used:
WB44X200, WB44X173
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Could not keep the oven at the proper temp. and was hotter in back.
Unscrewed back plate, then used nut driver to remove wires. Put wires on new element. Tightened with nut driver put in place and screwed plate tight. Did same with bottom element. My oven works great now.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dorothy from Moorpark, CA
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The oven heating element broke.
Pretty much the same as everyone else said ... turned off the power, removed the screws and wires, attached the screws and wires ... done. Pretty simple. A very easy repair job. Thanks, !
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bobby from Greensboro, GA
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Heating element burned out
Removed bad element and installed new one
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glen A. from Houston, TX
Parts Used:
WB44X200
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out element.
Easy repair and I now feel like I have a new oven! THNX!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glen from Winsted, CT
Parts Used:
WB44X200
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out element
Made sure oven was off. Made sure circuit breaker was off. Got a bright flashlight to see what I was doing. Bent lead ends to roughly the attitude of the element. Got 1st screw going by hand and tightened with screw driver. Ditto for second screw. Used nut driver to screw entire assembly into back of oven with two hex head screws. Tu rned breaker back on. Put oven controls on 350 degrees. Held onto element and turned on the oven. Yup it warmed up. Yes I let go pretty quickly - no burns. Waited for the preheat light to do its thing. Put the chicken into the oven and baked it for an hour. It turned out just as hoped for, just like before the element started dying.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
★ Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul M - September 2, 2021
Verified Purchase
Replacement
The fit was perfect and fairly easy to replace. Just a little difficult to work in the back of the oven.

Model Compatibility

This part works with the following models:
Fix Number: FIX249424
Manufacturer Part Number: WB44X200
Brand Model Number Description
General Electric JK1201 Range - GE Range/Stove/Oven Model JK1201 Parts
General Electric JK14*08 Range - GE Range/Stove/Oven Model JK14*08 Parts
General Electric JK14*09 Range - GE Range/Stove/Oven Model JK14*09 Parts
General Electric JK14*R3 Range - GE Range/Stove/Oven Model JK14*R3 Parts
General Electric JK140R1BC Range - GE Range/Stove/Oven Model JK140R1BC Parts
General Electric JK19*08 Range - GE Range/Stove/Oven Model JK19*08 Parts
General Electric JK25*R3 Range - GE Range/Stove/Oven Model JK25*R3 Parts
General Electric JK25002 Range - GE Range/Stove/Oven Model JK25002 Parts
General Electric JK25102 Range - GE Range/Stove/Oven Model JK25102 Parts
General Electric JK25202 Range - GE Range/Stove/Oven Model JK25202 Parts
General Electric JK25302 Range - GE Range/Stove/Oven Model JK25302 Parts
General Electric JK25402 Range - GE Range/Stove/Oven Model JK25402 Parts
General Electric JK29006 Range - GE Range/Stove/Oven Model JK29006 Parts
General Electric JK29007 Range - GE Range/Stove/Oven Model JK29007 Parts
General Electric JK29008 Range - GE Range/Stove/Oven Model JK29008 Parts
General Electric JK29009 Range - GE Range/Stove/Oven Model JK29009 Parts
General Electric JK29106 Range - GE Range/Stove/Oven Model JK29106 Parts
General Electric JK29107 Range - GE Range/Stove/Oven Model JK29107 Parts
General Electric JK29108 Range - GE Range/Stove/Oven Model JK29108 Parts
General Electric JK29109 Range - GE Range/Stove/Oven Model JK29109 Parts
General Electric JK29206 Range - GE Range/Stove/Oven Model JK29206 Parts
General Electric JK29207 Range - GE Range/Stove/Oven Model JK29207 Parts
General Electric JK29208 Range - GE Range/Stove/Oven Model JK29208 Parts
General Electric JK29209 Range - GE Range/Stove/Oven Model JK29209 Parts
General Electric JK29306 Range - GE Range/Stove/Oven Model JK29306 Parts
General Electric JK29307 Range - GE Range/Stove/Oven Model JK29307 Parts
General Electric JK29308 Range - GE Range/Stove/Oven Model JK29308 Parts
General Electric JK29309 Range - GE Range/Stove/Oven Model JK29309 Parts
General Electric JKP06*01 Range - GE Range/Stove/Oven Model JKP06*01 Parts
General Electric JKP06*02 Range - GE Range/Stove/Oven Model JKP06*02 Parts
Bake Element - 240V
$ 48.21
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.