GE/GE_Thumb/00108750i03.gif
See part 251 in the diagram
( Grid squares measure 1x1 inch )

Bake Element - Push On Terminals - 240V

★★★★★
★★★★★
1 Review
$78.33
Fix Number: FIX249285
Manufacturer #: WB44T10010
Manufactured by: GE

Product Description

If your oven is not coming up to temperature, is not heating at all, or has inconsistent temperatures, it may be time to replace your bake element. The bake element is found at the bottom of your oven and is responsible for providing the heat in order to cook your food. When replacing this OEM part, you will want to disconnect power to your appliance, and pull it out from the wall so that you can access the back panel. Removing the oven racks, and even the oven door will make accessing the screws at the back of the oven easier. You will need to use pliers to disconnect the wires from the bake element terminal at the panel in the back of your range. You can then unscrew the element inside the oven to remove it. Replace it with the new bake element and install the screws back in place. The wires can then be reattached along with the back panel, and your oven should heat up properly again.

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 20 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Bake element replacement
1. Turn of over power at the breaker.
2. Remove bake element cover. There's 2 quarter inch nuts.
3. Disconnect old element. For me there was not much play in the wires so when I disconnected the old element I lost the wire in the insulation. If this happened you can remove the central plate cover on the back of the oven and you can easily find the wires again.
4. Connect the replacement element.
5. Screw the bake element cover back in.
6. Turn power back on.
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Keith from Reading, PA
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Replace Baking Element
Turn off electric for range at fuse box. Open oven door and remove 2 screws holding baking element. Remove 5 screws from the center rear cover and then remove the 2 push on terminals. Remove old baking unit from oven and replace it with new one.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Nancy from Martins Ferry, OH
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Oven wouldn't work
New oven element
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Juan from Easton, PA
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
holes very small in the elements and don't came whit screws
Open the holes bigger so I can use the screws that came in the old element.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Isaac from Olympia, WA
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
baking element split in half
removed two screws with 1/4 nutdriver, pulled old element from back wall, removed one electrical connector at a time and put alligator clips on spade connectors to keep them from going back into small opening. connected new element tightened screws and tested. all worked great. 10 minutes later was baking again.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    peggy from kirksville, MO
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
heating element went out
I pulled the range took of the back (4 screws), I opened the oven door & removed 2 screws, disconnected the wires, attached the new one. I screwed everything back in place, put the stove back& was done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    JAMES from HOMER, LA
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Old element had burned out
2 screws released the complete element from the range,pulled it out unclipped the two wires (Be careful not to let go of the wires as they will draw back up into the range and very difficult to retrieve) reclip wires to new element , 2 screwes to secure element to range. Job done
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Toni from Osyka, MS
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Baking element burnt out
I pulled the stove out looked for a panel used a nutdriver unscrewed the panel I pulled the baking element plugins a loose (stove should be unplugged) went to inside of oven used a nutdriver and unscrewed the baking element plate pulled the element out then I reversed procedure.(please make sure the insulation around the terminals are not touching the terminals )
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    John from Fort Worth, TX
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Baking element slowed to heat, never able to reach 300 degrees.
Others tips proved to be very handy! Pull the unit out, (unplug it!) and remove the center back cover's 6 screws, exposing the wire connectors. 2 screws from the inside holding the element and it's out. A single 1/4" nutdriver was all it took. Perfect fit.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Robert from Denver, CO
  • Parts Used:
    WB44T10010
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
Baking element had burned out
I rolled the stove away from the wall and unplug the unit. I took a small socket and removed four small hex head screws from the back panel protecting the wiring. I removed the electrical connectors from the baking element. I went to the front of the oven and opened the oven door, removed the baking racks and removed two small hex head screws holding the baking element to the back wall. I then took the baking element out of the oven. I put the new baking element through the back wall of the oven and fastened the new baking element to the back wall with the two hex head screws. I replaced the baking racks and closed the oven door. I went back to the rear of the oven and pushed the two electrical connections on to the baking element and replaced the back panel with four hex head screws. I plugged the oven unit back in to the outlet. I then tested the baking element by heating it to 150 degrees. I placed a temperature thermometer into the oven compartment to see if it was heating at the correct temperature. It all turned out great.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Compatibility
This part works with the following models:
Fix Number: FIX249285
Manufacturer Part Number: WB44T10010
Brand
Model Number
Description
Kenmore
91192090300
Range
Kenmore
91192090301
Range
Kenmore
91192091300
Range
Kenmore
91192091301
Range
Kenmore
91192401990
Range
Kenmore
91192401991
Range
Kenmore
91192401992
Range
Kenmore
91192408990
Range
Kenmore
91192408991
Range
Kenmore
91192408992
Range
Kenmore
91192481990
Range
Kenmore
91192481991
Range
Kenmore
91192481992
Range
Kenmore
91192488990
Range
Kenmore
91192488991
Range
Kenmore
91192488992
Range
Kenmore
91192502990
Range
Kenmore
91192502991
Range
Kenmore
91192502992
Range
Kenmore
9119250799
Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
Kenmore
91192507990
Range
Kenmore
91192507991
Range
Kenmore
91192507992
Range
Kenmore
91192712020
Range
Kenmore
91192714020
Range
Kenmore
91192812300
Range
Kenmore
91192812301
Range
Kenmore
91192814300
Range
Kenmore
91192814301
Range
Kenmore
91193090300
Range