Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
December 24, 2021
I have installed a new Bake Element a new Temperature
regulator AND a new Control Panel but the oven will not get hotter than 175 degrees WHAT NOW?
For model number JBP66DY1AD
Hello Bruce, Thank you for your inquiry. You could have a wiring issue or one of the parts may be faulty. You can test the element and sensor with a multimeter, and check your wiring harness for any visible damage or loose connections. You can also test the terminal block to see if it has continuity as well. Good luck with your repair.
Door will not open, tried restarting. Still doesn't work. What next?
For model number JBP64BB1WH
Hello Paul, Thank you for the question. If no food or utensils are in the oven, start a Self-Clean cycle, then hit the Clear/Off pad after 60 seconds. If that does not unlock the door, run a short Self-Clean cycle (1-2 hours). We hope this helps!
2 Questions and Answers
