GE/GE_Thumb/00113460i01.gif
See part 218 in the diagram
( Grid squares measure 1x1 inch )

Flat Style Oven Igniter Kit

★★★★★
★★★★★
1 Review
$ 57.85   In Stock
Fix Number: FIX231280
Manufacturer #: WB13K21
Manufactured by: GE

Product Description

The flat style gas oven igniter included in this kit has a body length of 3-3/4". This kit comes with a mounting bracket and a wire connector with a plug. *Please note: the connector plug might need to be removed and spliced to range wiring using porcelain wire nuts. This part is used to heat your oven.

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 36 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    tom from Paso Robles, CA
  • Parts Used:
    WB13K21
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
oven wouldn't light
we opened the bottom drawer halfway, took off the cover plate on the bottom inside of the oven. removed the electric covers at the back. removed the old igniter. bolted the new igniter in it's place and snapped the electric fitting back together. We did not turn off the gas or unplug the unit, since there were no bare wires on this brand unlike the models that use twist nuts. You definitely need a flashlight and someone with a flexible back, half an hour from start to finish
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Rogelio from Los Angeles, CA
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
On my oven broiler has hi/lo. The lo side does not heat much and the hi selector does not change the flame to high.
1. I turned off the gas and unplug the cord. I open the front door and took out the racks. I took the screw on the end of the tube in the middle and two screws with small plate covering the hole where the two wires of the igniter goes to the back of the oven. I open the back cover of the stove and unplug the Broiler igniter and pull the igniter and tube out on the front side of the oven. I remove the bad igniter and replace them with the new one (WB13K21) I tested the new one and it works well. I should have video tape my work because I did not see one on YouTube, only on the Bake side of the igniter.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kathy from Williamsport, PA
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
oven does not lite
watched the video on how to replace igniter
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    rolland from newcomb, NY
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
gas oven would not light
having not read any of the repair instructions on the internet I removed the bottom panels of the oven and the gas log then decided to read the published repair instructions.But as it worked out I did not have to worry about dropping the attaching screws into the bottom pan. Reassembled everything and it worked as new. thanks for all your help easily saved a 100.00 dollar service call.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Vickie from Santa Fe, NM
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Oven shutting off and on
Followed the instructions on the bake igniter
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Danny from Tinley Park, IL
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
I was cleaning the oven and when my rag hit the igniter and it broke off.
Once I got the new one it was just removing two small screws and taking the old igniter out and replacing it with the new one . I really like the new one , it has a cage around it so it can't be broken so easy. Some one was thinking. After I mounted the new one I unplugged the old one and plugged the new one in. The whole job took about 20 min.. The wife was happy and I was out of the dog house.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Tom from Burlington, IA
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Would not light
Watch the video , really easy .
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Iris from Philadelphia, PA
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
The oven ignitor burnst out.
The oven top and racks were removed from the oven and the ignitor was removed, and the new one replaced, and my oven is now operational again.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Paul from Cropseyville, NY
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Oven would not light,
Heater element would glow but, was weak. I checked the element with my meter and sure enough, it was weak. Your website is great as it had told me that the element was responsible more than 80% of the time for my issue. I ordered the part at 2pm and FedEx delivered it the NEXT DAY! at 11:15 AM. I was back up and running by Noon. I appreciate it!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Gerald from Westford, MA
  • Parts Used:
    WB13K21
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Oven was intermittently lighting/heating
On line research pointed to oven igniter issue. In oven I removed the bottom panel. Still could not reach the disconnect in order to remove the old igniter. I then removed a second panel (not necessary). I then realized that by removing the draw below the oven that the disconnect could be reached. I then undid the disconnect by squeezing the tabs. Using the nut driver I removed the 2 nuts holing the old igniter, removed it and installed the new one. Very easy repair and now works great!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX231280
      Manufacturer Part Number: WB13K21
      Brand
      Model Number
      Description
      General Electric
      147210
      Range
      General Electric
      147211
      Range
      General Electric
      147212
      Range
      General Electric
      147213
      Range
      General Electric
      147260
      Range
      General Electric
      147261
      Range
      General Electric
      147262
      Range
      General Electric
      147263
      Range
      Kenmore
      36261111699
      Range
      Kenmore
      36261118699
      Range
      Kenmore
      36261120101
      Range
      Kenmore
      36261120102
      Range
      Kenmore
      36261120103
      Range
      Kenmore
      36261120104
      Range
      Kenmore
      36261121890
      Range
      Kenmore
      36261121891
      Range
      Kenmore
      36261121892
      Range
      Kenmore
      36261121893
      Range
      Kenmore
      36261121894
      Range
      Kenmore
      36261121895
      Range
      Kenmore
      36261121896
      Range
      Kenmore
      36261128890
      Range
      Kenmore
      36261128891
      Range
      Kenmore
      36261128892
      Range
      Kenmore
      36261128893
      Range
      Kenmore
      36261128894
      Range
      Kenmore
      36261128895
      Range
      Kenmore
      36271112000
      Range
      Kenmore
      36271112001
      Range
      Kenmore
      36271117000
      Range