Front Burner Igniter/Orifice Assembly - 14K 316272000
$142.16
In Stock
- Fix Number:
- FIX899768
- Manufacturer #:
- 316272000
- Manufactured by:
- Frigidaire
Jump to:
Product Description
-
Works with the following brands:Frigidaire, Kenmore, Crosley
-
Works with the following products:Range
-
Part# 316272000 replaces these:AP3562174, 1036862
- Works with the following brands:
- Frigidaire, Kenmore, Crosley
- Works with the following products
- Range
- Part# 316272000 replaces these:
- AP3562174, 1036862
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Darryl from Owasso, OK
- Parts Used:
- 316272000
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
Front burner would try to ignite but not light.
Hardest part was figuring out how to get the range top off. 1 - Remove burner grates, caps and burner heads. 2 - Remove the two screws from each burner assy. 3 - Slide a small pry bar or screwdriver between the range top and side of the range and the top will pop up and can removed. 4 - Remove burner control knobs and the top and bottom s
... Read more
crews holding the control panel on. 5 - Remove the two guide pins at each front corner and the screws at the rear of the burner box, 6 total. 6 - Gently raise the burner box and disconnect the gas line to the control valve then unplug the igniter. Reverse order to install me valve. It's a little tricky getting the screws back in the burner assemblies but you can grip the burner well enough to pull it up and install the screws. Don't over tighten screws they will strip easily.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX899768
Manufacturer Part Number: 316272000
Manufacturer Part Number: 316272000
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.