This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.
Works with the following brands:
Frigidaire, Tappan, Kenmore, Crosley
Works with the following products:
Range
Fixes the following symptoms:
Little to no heat when baking, Element will not heat, Oven not heating evenly, Will Not Start
Part# 316075103 replaces these:
AP2125026, 09990062, 316075100, 316075102, 316075104, 316282600
...
Show more, 3203534, AP4356505, F83-455 Show less
Works with the following brands:
Frigidaire, Tappan, Kenmore, Crosley
Works with the following products
Range
Fixes the following symptoms
Little to no heat when baking, Element will not heat, Oven not heating evenly, Will Not Start
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Logan
April 14, 2022
oven will not heat
For model number t e o356 b f w 3
Hello Logan, thank you for writing. It is recommended to replace the Oven Bake Oven FIX438018. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
JT
November 29, 2022
I REPLACED THE HEATING UNIT FOR THE BAKING PART OF THE OVEN AND IT DOES NOT HEAT WITH NEW UNIT INSTALLED. IS THERE A FUSE OR SOMETHING THAT MAY BE CAUSING IT TO NOT HEAT UP??
For model number FFEF3048LSN
Hi, thank you for reaching out. The issue is probably with the Temperature Sensor, part number FIX1528542. If it is not causing the issue, you need to replace the Control Board, part number FIX12114577, to fix the issue. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
My Kenmore electric range oven heating elements won't work on both the bake and broil elements. Could it be something else and would it be worth fixing.
For model number 790.46784900
Hello Tom, thank you for your question. The part that operates both elements is the Timer FIX2379175. We look forward to hearing from you.
My Kenmore oven heats but is not baking properly. If the recipe requires 375°, it must be increased to 385°. This started happening since last week. I bake a lot.
For model number 790.78303010
Hello Lauraine, thank you for contacting us. You may need to check the bake element. If it is not faulty, then you may need to replace the temperature sensor, part number FIX1528542, to fix the issue. Glad to be of assistance!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Wife complained that oven was taking an unusaully long time to heat for baking.
1. Removed two (2) small sheet metal screws that secured the heating element to the rear of the oven. 2. Slid element out about four inches (4"). 3. Unplugged the two (2) spade connectors. 4. Removed old element. 5. Installed new element in reverse order.
Very simple. Turn off breaker to range. Remove 2 (ea) #8 screws,pull element out, remove the 2 spade connectors. Install 2 spade connectors to new element, push into position, install 2(ea) #8 screws,turn breaker to range on & ops check; good to go.
Simply unscrewed the two tabs at the back of the oven that are attached to the bottom burner element, pulled out the element which was attached to the wiring with quick clip connectors, detached the connectors and reattached the new element, and then screwed it back in. Turned on the oven and it worked like a charm.
Turned power off to unit. Removed the 2 screws holding heating element on to back wall. Gently pulled element ends out of back wall exposing wire clips that make the connection. Pulled off clips, cleaned bottom of oven, put clips on new element, gently pushed wires back into unit, re-attached the screws. Turned power back on to unit. Ran
... Read moreit at 350 degrees for 10 minutes to burn off any chemicals from manufacturing and shipping.
1.Pull stove away from wall. 2.Unpug power cord 3.Using nutdriver, remove two screws holding element to oven wall. 4.Separate element from wiring by simply pulling the wires with "push- on" connections from element. 5.Reverse process to install new element.
Instruction video very helpful but we did need to buy different terminals as the ones on our oven were a little different. after replacing the terminals everything else was just like the video.
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(10 Reviews)
4.9
★★★★★
★★★★★
Filter By Rating:
5★
9
4★
1
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chris C - April 2, 2022
Verified Purchase
New oven again
Fixed oven. Was able to clean it after install. Don't need a new oven!
★★★★★
★★★★★
David N - March 23, 2022
Verified Purchase
Perfect Replacement
Easy fix. Less than 5 minutes to swap out with the failed unit. Works better now than the original burner ever did
★★★★★
★★★★★
James F - October 8, 2021
Verified Purchase
Great product description and service
Got my product faster than expected installed madder of minute. Works great.higgly recommend using their product.
★★★★★
★★★★★
Anna W - September 7, 2021
Verified Purchase
Great
Everything went well
★★★★★
★★★★★
Sharon S - September 3, 2021
Verified Purchase
Element
Easy install. Last element lasted 5 years. That's why I ordered 2.
★★★★★
★★★★★
Jennifer L - July 19, 2021
Verified Purchase
Fit and works as intended
Awesome price, arrived quickly. Easy to install.
★★★★★
★★★★★
Anthony B - July 11, 2021
Verified Purchase
Fit as promised
I'm happy with the purchase but it took about a week longer to receive than was stated prior to check out.
★★★★★
★★★★★
Brenda M - May 17, 2020
Verified Purchase
Easy peasy
It was easy to install
★★★★★
★★★★★
Tanya S - April 17, 2020
Verified Purchase
Element for our oven
Our part was easy to order online. Came to us quickly. Was exactly what we ordered and was easy to install and works perfectly!! Definitely recommend ordering from fix.com!
Thank you so muc!
★★★★★
★★★★★
Brent B - November 12, 2019
Verified Purchase
Bake element replacement
Very easy both in ordering and installation, wife said I was her hero!
Model Compatibility
This part works with the following models:
Fix Number: FIX438018
Manufacturer Part Number: 316075103
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
