OEM Frigidaire Range Oven Bake Element [318255006] | Ships Today | Fix.com
Oven Bake Element – Part Number: 318255006
Oven Bake Element – Part Number: 318255006 Oven Bake Element – Part Number: 318255006 https://fixcom.azureedge.net/Schematics/Frigidaire/27R58OZI.gif

Oven Bake Element

Your Price
$90.26

Fix Number: FIX3633414

Manufacturer #: 318255006

Manufactured by: Frigidaire

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

The 3000W bake element is located on the bottom of the oven cavity to supply heat for baking. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Works with the following brands

Frigidaire, Kenmore, Gibson, Westinghouse, Crosley, Tappan

Works with the following products

Range, Wall Oven

Fixes the following symptoms

Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 13 reviews
Customer:
Dale from Antigo, WI
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Bake element needed replacement
Removed the back panel checked for power at the base of element, had 240 volts so knew element was burnt out. Replaced element with new one from Parts Select by unplugging the wires from old element and removing 2 screws inside oven and replacing 2 screws and plugging wires into the new element. Works fine now.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Richard from Lake Geneva, WI
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out oven heating element
1) Remove two screws holding element to back of oven. 2) Gently pull element towards you to expose wires connected to element. 3) Unplug wires from element. Reverse these instructions with new element.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
JACKIE from Eutawville, SC
Parts Used:
  • Oven Bake Element
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Feet of old element broken of leaving element on bottom of oven
Gave the unit to my tenant.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
marilyn from washington, IL
Parts Used:
  • Oven Bake Element
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The bake element broke
I turned off power. Unscrewed element inside the over. I removed the back panel of stove to reach connection easier. Disconnected old element and removed it. placed new inside pushed ends through cotton insulation screwed to inside then went to back of stove connected new element to connectors. replaced back panel. turned on power, then oven. voila!!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Ken from Amarilo, TX
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Baking element in dual fuel range had burnt out
Turned off the power at junction boxes. With a Phillips head screwdriver removed 2 screws, pulled the element forward, uncoupled the two power wires from the element. Positioned the new element in the oven ensuring the element was "level", coupled the power supply wires to the new element, Re-positioned the element into the back of the oven, re-arranged the insulation around the element arms, placed the two screws securing the element in place. Power back on. Easy, peasy- back in the baking business. Proud of myself for completing this DIY project instead of spending the money to have a service man in to do the repair.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Carolyn from Radford, VA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Burned out bulb and lower oven element
ordered parts; waiting for a handy man (or handy woman)...
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Kathleen from Powhatan Point, OH
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Baking element no longer working.
I am a 71 year old woman and it was easy for me. I turned off the power to the oven at the breaker box. Unscrewed the old element with a phillips screwdriver. Pulled it out far enough to disconnect the wires. Then I took the new element attached the wires tightening the connectors a bit with needle nose pliers. I gently placed the wires back into the insulation then used the screws I took out of the old element to install the new one. I turned the power back on at the breaker box and proceeded to bake a dozen cookies which turned out great!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jacquelyn from Haddam, CT
Parts Used:
  • Oven Bake Element
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Heating element in oven burned out. I ordered new one on thur. And had new part on sat.
I removed 2 screws in back of oven to disconnect old element. I could not connect new one to wires so I removed back plate from stove and wires were there so I plugged into new element and replaced 2 screws in oven then replaced the panel on back of stove and all is right again. It was much easier to connect wires from back than to do it from inside the oven.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Richard from Bend, OR
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Neither element would heat
Removed old elements, reaching screws was difficult. Replaced elements, did not solve problem. Called service agent.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
LEAH from TUNNELTON, WV
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Bake element did not heat
My son in law turned off breaker. Removed racks and took out the two screws holding the element in place unplugged the element and plugged the new element in put screws back in and turned breaker back on. Very easy.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Thomas from Quincy, IL
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Original bake element failed.
I viewed the excellent instructional video beforehand and followed those steps to the letter. I would encourage others to do likewise. Replacing the bake element was a very simple task.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Chris from Lillington, NC
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken bake element & light bulb
Turned of the power at the fuse box as the oven was hard wired to the electrical source and then removed the old element via the screws at the back of the oven. Disconnected the wires from the element and then reconnected those to the new element. Screwed the element base to the back wall of the oven and then replaced the light bulb.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
James from Whitmore Lake, MI
Parts Used:
  • Oven Bake Element
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Oven heating element had burned a small hole in bend of unit.
watched the 5 minute video provided. very helpful. after unscrewing bad element, had a great chance to really clean bottom of oven. in reinstalling, needle nose plyers we used to hold the slip on wires from the oven to the new element ends . used my cordless screw gun to aid in replacing the 2 screws.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX3633414
Manufacturer Part Number: 318255006
Brand
Model Number
Description
Frigidaire
74403
Range - DUAL FUEL RANGE
Kenmore
790.46814991
Range - Kenmore Range/Stove/Oven Model 790.46814991 (79046814991, 790 46814991) Parts
Kenmore
790.46819991
Range - Kenmore Range/Stove/Oven Model 790.46819991 (79046819991, 790 46819991) Parts
Kenmore
790.76839100
Range - Kenmore Range/Stove/Oven Model 790.76839100 (79076839100, 790 76839100) Parts
Kenmore
790.99613703
Range - Kenmore Range/Stove/Oven Model 790.99613703 (79099613703, 790 99613703) Parts
Kenmore
79045062400
Range
Kenmore
79045062401
Range
Kenmore
79045069400
Range
Kenmore
79045072400
Wall Oven
Kenmore
79045074401
Wall Oven
Kenmore
79045079401
Wall Oven
Kenmore
79045252400
Range
Kenmore
79045254400
Range
Kenmore
79045262500
Range
Kenmore
79045262501
Range
Kenmore
79045262502
Range
Kenmore
79045262503
Range
Kenmore
79045662100
Range
Kenmore
79045662103
Range
Kenmore
79045669102
Range
Kenmore
79045669103
Range
Kenmore
79045669104
Range
Kenmore
79045702300
Range
Kenmore
79045704300
Range
Kenmore
79045709300
Range
Kenmore
79045712100
Range
Kenmore
79045712102
Range
Kenmore
79045712103
Range
Kenmore
79045714100
Range
Kenmore
79045714102
Range