11757456-1-M-Whirlpool-WPY0314907-Oven Temperature Sensor
Part Location Diagram of WPY0314907 Whirlpool Oven Temperature Sensor
See part 14 in the diagram
11757456-1-S-Whirlpool-WPY0314907-Oven Temperature Sensor 360 view
( Grid squares measure 1x1 inch )
11757456-1-S-Whirlpool-WPY0314907-Oven Temperature Sensor 11757456-1-S-Whirlpool-WPY0314907-Oven Temperature Sensor 360 view
Part Location Diagram of WPY0314907 Whirlpool Oven Temperature Sensor

Oven Temperature Sensor

Rated by 3 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$124.50
In Stock
Fix Number: FIX11757456
Manufacturer #: WPY0314907
Manufactured by: Whirlpool
  • Product Description

    This is a genuine OEM replacement part. This temperature sensor is commonly used in ranges and wall ovens. This sensor determines what the internal cooking temperature of your appliance it. You may be getting error codes that indicate a problem, or you might notice the main indicator is that temperature in your oven will not match the reading. You can confirm there is a problem with your sensor by testing it with a multimeter. Some other symptoms include will not start, no heat, not enough heat, or too much heat. This replacement sensor is slight more than three inches in length, and it come with the wire connector. Some tools you may require for this installation are a 1/4-inch nut driver, needle nose pliers, and wire strippers/crimpers. Before starting this repair work make sure your appliance is unplugged.

  • Works with the following brands
    Amana, Caloric, Maytag, Whirlpool
  • Works with the following products
    Range, Wall Oven
  • Fixes the following symptoms
    Little to no heat when baking, Oven is too hot, Will Not Start, Oven not heating evenly
  • Part Number Cross Reference
    Part# WPY0314907 replaces these:
    AP6024106, 0306529, 0314907, 4363588, 8189708, Y0306529, Y0314907
Questions and Answers
3 Installation Instructions Model Compatibility
Product Description Questions and Answers Installation Instructions Model Compatibility

Product Description

This is a genuine OEM replacement part. This temperature sensor is commonly used in ranges and wall ovens. This sensor determines what the internal cooking temperature of your appliance it. You may be getting error codes that indicate a problem, or you might notice the main indicator is that temperature in your oven will not match the reading. You can confirm there is a problem with your sensor by testing it with a multimeter. Some other symptoms include will not start, no heat, not enough heat, or too much heat. This replacement sensor is slight more than three inches in length, and it come with the wire connector. Some tools you may require for this installation are a 1/4-inch nut driver, needle nose pliers, and wire strippers/crimpers. Before starting this repair work make sure your appliance is unplugged.

  • Works with the following brands:
    Amana, Caloric, Maytag, Whirlpool
  • Works with the following products:
    Range, Wall Oven
  • Fixes the following symptoms:
    Little to no heat when baking, Oven is too hot, Will Not Start, Oven not heating evenly
  • Part# WPY0314907 replaces these:
    AP6024106, 0306529, 0314907, 4363588, 8189708, Y0306529 ... Show more , Y0314907 Show less

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Daniel from St Louis, MO
  • Parts Used:
    WPY0314907
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
F2 and F3 fault codes with non-stop beeping
Our oven is a Double Convection Oven mounted in the wall. Removing and replacing the temperature sensor was very simple, but getting the oven out of the wall and back in was the difficult part. Some notes: 1. In retrospect, I could have replaced the sensor by removing 2 screws, pulling the wire through the hole till I got to the connector, and then releasing the connector. However, I could not easily work the connector through the hole and was afraid that the wire may have been clamped on the back side of the oven (it wasn't). 2. If you need to remove your oven from the wall, have a platform of similar height available to slide the oven out on. I made one out of scrap lumber I had around the house and it worked fine. 3. When sliding the oven back into the wall, be careful how the power cable is routed to the oven. We had a very tight squeeze and the power cable was a real source of frustration till we got it just right. 4. There are sharp edges on the oven, so wearing lightweight work gloves helps when moving the oven. 5. If you need to get to the back of the oven, the back cover is it is held in place by sheet-metal screws easy to remove/install. 6. To protect the plastic trim in front of the oven, I removed it prior to moving the oven. Taking a photo of this before-hand may help when putting it back together. I also removed the oven doors to make things easier. 7. In summary, if your oven is not wall mounted, replacing the temperature sensor is very easy. Good luck!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Mary from Copper Hill, VA
  • Parts Used:
    WPY0314907
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
oven comes on then goes right back off
Was very easy to replace the temperature senor. But this didn't correct my problem, must not been the senor.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Roxann from Norwich, CT
  • Parts Used:
    WPY0314907
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
oven does not heat
its not repaired, the sensor has two parts, i only have one part. i need the other
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Model Compatibility
This part works with the following models:
Fix Number: FIX11757456
Manufacturer Part Number: WPY0314907
Brand
Model Number
Description
Amana
ACO27DE
Range
Amana
ACO27DE1
Range
Amana
ACO27DE1-P1132343NE
Wall Oven - ELECTRIC OVEN
Amana
ACO27DEW
Range
Amana
ACO27DEW1
Range
Amana
ACO27DEW1-P1132343NW
Wall Oven - ELECTRIC OVEN
Amana
ACO27DK
Wall Oven
Amana
ACO27DK-P1132334NK
Wall Oven - ELECTRIC OVEN
Amana
ACO27DK-P1132343NK
Wall Oven - ELECTRIC OVEN
Amana
ACO27SE
Range
Amana
ACO27SE1
Range
Amana
ACO27SE1-P1132339NE
Wall Oven - ELECTRIC DOUBLE OVEN
Amana
ACO27SEW
Range
Amana
ACO27SEW1
Range
Amana
ACO27SEW1-P1132339NW
Wall Oven - ELECTRIC DOUBLE OVEN
Amana
ACO27SK
Wall Oven
Amana
ACO27SK-P1132339NK
Wall Oven - ELECTRIC DOUBLE OVEN
Amana
AGDS901E
Range
Amana
AGDS901WW
Range
Amana
AGDS902E
Range
Amana
AGDS902E-P1131828NE
Range - GAS RANGE
Amana
AGDS902E-P1131831NE
Range - GAS RANGE
Amana
AGDS902SS
Range - Freestanding, Gas
Amana
AGDS902WW
Range - Freestanding, Gas
Amana
AGOD2750E
Wall Oven
Amana
AGOD2750WW
Wall Oven
Amana
AGS760L
Range - Downdraft, Gas
Amana
AGS760L-P1141237NL
Range - GAS RANGE
Amana
AGS760L-P1141251NL
Range - GAS RANGE
Amana
AGS760W
Range - Downdraft, Gas
Back to Top