Presto Parts

Fix Number

FIX10468714

Manufacturer Part Number

85772

This is an Authentic Manufacturer Sourced replacement part used on certain Presto Pressure Canners. The steam gauge registers pressure readings during canning and cooking. Includes a Metal Gauge, Rubber Washer, Metal Washer, and a Metal Nut.

Fix Number

FIX10468413

Manufacturer Part Number

09907

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09907 Pressure Canner Sealing Ring/Air Vent is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Air Vent will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468416

Manufacturer Part Number

09911

This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Pressure Cooker/Pressure Canner Automatic Air Vent will release the excess pressure from in the pot.

Fix Number

FIX10468411

Manufacturer Part Number

09905

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09905 Pressure Cooker Canner Sealing Ring/Overpressure Safety Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468426

Manufacturer Part Number

09936

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09936 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468616

Manufacturer Part Number

85407

Genuine Presto replacement part, it is sold individually. This is a safety feature for the Presto products listed below. Once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. This part is also known as a pressure cooker interlock.

Fix Number

FIX10468437

Manufacturer Part Number

09978

This part comes directly from Presto. The Regulator maintains the proper pressure in many canners and pressure cookers. This part is regulates the pressure to 15lbs per square inch. When the pressure reaches 15lbs the regulator starts to gently rock. This part is made of stainless steel and has a plastic handle. This part should be replaced if it no longer sits correctly on the Vent Pipe (part number 01058). No tools are needed to replace this part.

Fix Number

FIX10468418

Manufacturer Part Number

09915

This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Fix Number

FIX10468443

Manufacturer Part Number

09985

Genuine Manufacturer Approved Sealing ring for Preston Pressure Canners. This Sealing Ring includes the part #09915 overpressure plug in the package. The sealing ring fits around the inside rim of the cover and forms a pressure-tight seal between the cover and the body of the pressure canner during canning and cooking.

Fix Number

FIX10468415

Manufacturer Part Number

09909

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09909 Pressure Cooker Sealing Ring/Automatic Air Vent Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Automatic Air Vent will pop out of the lid releasing the excess pressure in the pot.