OEM MK Diamond Tile Saw Parts & Accessories

Carbon Brush Set

$31.34

Fix Number: FIX10420653
Manufacturer Part Number: 151774

This is a manufacturer sourced replacement part used on a MK Diamond tile saws. It includes two (2) carbon brushes with lead wires and springs attached. Carbon brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver and pliers to complete this job. • First remove screw holding the cover • Remove the housing/cover to gain access to armature and brushes • Remove the old brush • Install the new brush • Reassemble and test your tool

Ball Bearing

$50.61

Fix Number: FIX12605254
Manufacturer Part Number: 080009006137

This ball bearing fits variety of lawn and gardening power tools. The ball bearing connects two parts and allows for them to rotate smoothly. With use and time, the constant pressure, heat and friction takes a toll on the bearings and can lead to its damage. In this case, it is important to replace the ball bearings in your tool frequently and consistently. Refer to the diagram provided by the manufacturer for correct location and application of the ball bearing in your tool.

Switch, 20a Dpst Toggle, W/ Qd

$36.13

Fix Number: FIX10420932
Manufacturer Part Number: 154310

This replacement switch is a genuine OEM supplied item that is designed for MK Diamond tile saws. It allows user to turn the equipment on and off. Over time mechanical switches tend to wear out and begin to fail compromising tools functionality eventually requiring replacement. Please note this durable switch is sold individually, to replace it you will need a screwdriver.

Knob, Davies

$6.56

Fix Number: FIX10420625
Manufacturer Part Number: 151681

This item has been sourced from the original manufacturer to be used with tile saws, core drill rigs, and concrete saws from MK Diamond. The knob is used with different types of machines and the application of the knob can vary based on the model of the equipment. It is recommended to review your model's part diagram to verify the knob's usage and compatibility. This item is sold individually.

Owners Manual

$5.95

Fix Number: FIX10421307
Manufacturer Part Number: 156934

Stand, Folding, Universal, W/c

$298.60

Fix Number: FIX10420661
Manufacturer Part Number: 151889

Filter, Motor

$30.88

Fix Number: FIX10421453
Manufacturer Part Number: 157729

This is an authentic replacement part manufactured for use with wet saws. The special foam filter is used to prevent debris from entering and potentially damaging the electric motor. This motor filter is available as an individual replacement part, please see model diagram for associative parts.

Fitting, Plastic, 1/4 Fnpt X 1

$11.28

Fix Number: FIX10420467
Manufacturer Part Number: 128397

Cord, Pump Pigtail, 16/3 Sjtw

$25.86

Fix Number: FIX10420957
Manufacturer Part Number: 154446

Wing-nut, 5/16-18 Nylock

$5.95

Fix Number: FIX10420640
Manufacturer Part Number: 151746

The wing-nut attaches to the guard casting. This item is made of metal and is sold individually. This is a genuine MK Diamond part sourced directly from the manufacturer for use in concrete saws and tile saws. No tools should be needed during the replacement of this nut. It will require replacing if it breaks or strips.

MK Diamond Tile Saw Parts

Popular MK Diamond Tile Saw Parts

MK Diamond Tile Saw Appliance Types

Popular MK Diamond Tile Saw Models

MK Diamond Tile Saw Parts

Start With Your Model Number

Popular MK Diamond Tile Saw Parts

MK Diamond Tile Saw Appliance Types

Popular MK Diamond Tile Saw Models