OEM Porter Cable Chop Saw Parts & Accessories

Brush (Sold Individually)

$10.50

Fix Number: FIX10106168
Manufacturer Part Number: 1313113

This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.

Installation Instructions

Dwayne from Millville, NJ

Broken belt (motor runs, blade didn't turn)

1) Watched YouTube video before ordering parts to confirm my problem and to get an overview of the repair.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.

Cleaning and testing took as long as changing the belt and inspecting brushes. Read more...

Brush

$8.51

Fix Number: FIX10108901
Manufacturer Part Number: 690741

Bearing

$51.91

Fix Number: FIX10315390
Manufacturer Part Number: 1086894S

This ball bearing fits a variety of lawn and gardening tools. The ball bearings prevent friction between rotating parts. The balls do this by bearing the load and spin and distributing the weight equally, while the minimal contact area of the balls reduce friction. This allows your tool to run easily. Ball bearings are a commonly replaced part because of the constant wear they experience. Tip: check your bearings and replace them periodically. *Please note: they are sold individually.

Watch the install video

Reliever

$6.09

Fix Number: FIX10109834
Manufacturer Part Number: 810716

This cord protector or reliever fits the end of your cord to protect the base of the cord from getting damaged and bent. If your cord is not aligned and protected it can become a safety hazard. If your cord protector is damaged or broken, then replace it as soon as possible. *Please note: this part is sold individually.

Bearing

$7.06

Fix Number: FIX10110662
Manufacturer Part Number: 874538SV

Connector VS

$4.99

Fix Number: FIX10108826
Manufacturer Part Number: 682063

Nut,Hex

$4.99

Fix Number: FIX10169670
Manufacturer Part Number: 330015-03

This hex nut with internal threads, screws to the shank of a bolt or a hex cap screw in a variety of lawn and gardening tools. It can have multiple applications depending on the tool you are using. To replace, you will need a wrench to loosen and tighten the nut. For detailed installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug tool from power source before beginning this repair project.