Sander Springs and Shock Absorbers

Fix Number

FIX10140177

Manufacturer Part Number

158324-9

This is a genuine Makita replacement part, it is sold individually. It has a soft foam pad with a metal backing. It has six vacuum holes for use with the 166078-4 Dust bag. It is remove by unscrewing four 266020-6 Screws. The sandpaper is held by two clamps on the base assembly.

Fix Number

FIX10336574

Manufacturer Part Number

01468

This is a spring for your sander. It is known as a conical spring because it is cone shaped, and coiled. It is comparable to a compression spring because it stores energy by absorbing shock, and then releasing it, to maintain the force between two surfaces. The spring is a part of the muffler assembly in your sander. The muffler assembly reduces the noise coming from your machine. Over time the spring may lose tension and need replacing. If you are replacing your muffler assembly, or similar parts, we also recommend replacing the spring for an even wear.

Fix Number

FIX10142999

Manufacturer Part Number

231038-6

Fix Number

FIX10142998

Manufacturer Part Number

231037-8

This is an authentic OEM part. The Makita compression spring 7 is made for use with several router and grinder devices. The metal spring is often fitted in the motor bracket, providing tension to the pin. This component is sold individually. Please refer to the specific manual for repair instructions. No tools should be necessary for making the installation.

Fix Number

FIX12096365

Manufacturer Part Number

4648747

Fix Number

FIX10141329

Manufacturer Part Number

192978-2

This is a genuine Makita replacement part that has been sourced from the original manufacturer to be used with sanders and polishers. The rubber pad attaches to the spindle shaft and is used to support the polishing pad. This item is sold as an individual replacement part.

Fix Number

FIX18686725

Manufacturer Part Number

080038004013

Fix Number

FIX10340447

Manufacturer Part Number

96498

Fix Number

FIX10300590

Manufacturer Part Number

CA144880

This is an authentic Chicago Pneumatic replacement part, sourced from the original manufacturer for use with pneumatic power tools. The metal spring is commonly used to provided compression on the throttle valve assembly. This throttle valve spring is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX19509580

Manufacturer Part Number

2608005902