Sander Polisher Pulleys

Popular Sander Polisher Pulleys

Pulley 10-24.1
$23.71
In Stock
Fix Number
FIX10142284
Manufacturer Part Number
222147-2
Pulley
$55.80
In Stock
Fix Number
FIX10142279
Manufacturer Part Number
222130-9
This is a genuine item that is supplied by the original equipment manufacturer. It is specially designed for Makita belt sanders. This is the smaller pulley that the belt rides on. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Note, the bearings and the hardware to secure the top pulley shaft are all sold separately. Refer to the diagrams of your model for the correct application of this component. This high-quality part is made of durable materials and is sold as an individual item. To perform this repair you will need a wrench set and a screwdriver.
Pulley 33-64
$55.80
In Stock
Fix Number
FIX10142278
Manufacturer Part Number
222129-4
This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with hand-held belt sanders. This item is used as the drive pulley by connecting with the helical gear and causing the abrasive belt to rotate around the forward pulley. This item is available as an individual replacement part.
Idler
$60.49
In Stock
Fix Number
FIX10516120
Manufacturer Part Number
5640371
This item is sourced directly from the original equipment manufacturer. It is specially designed for use with Jet and Wilton sanders. The idler pulley helps to apply tension on the belt. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality material and is sold individually. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a wrench set to remove and secure the hardware that holds the idler.
Arbor Pulley
$105.12
In Stock
Fix Number
FIX10515183
Manufacturer Part Number
5511725
This is a genuine manufacturer-approved component which is specially designed for Jet and Wilton equipment. The purpose of this pulley is to apply tension to the belt. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this arbor pulley. It is a high-quality part is made of durable metal and is sold individually.
DRIVEN PULLEY
$27.52
In Stock
Fix Number
FIX12475785
Manufacturer Part Number
900527
This is an authentic replacement part manufactured for use with Porter Cable belt sanders. This pulley is the front pulley or driven pulley that sandpaper belt rolls across. This pulley is sold as an individual replacement part, please see model diagram for associative parts.
DRIVE PULLEY
$56.73
In Stock
Fix Number
FIX12488307
Manufacturer Part Number
698041
This is an authentic Porter Cable replacement part that has been sourced from the original manufacturer to be used with belt sanders. The drive pulley attaches to the shaft and is used to rotate the belt around the drum. This item is sold as an individual replacement part.
Shaft-drive Pulley
$50.76
On Order
Fix Number
FIX10515325
Manufacturer Part Number
5513025
This is an authentic Wilton replacement part that has been sourced from the original manufacturer to be used with belt/disc sanders. The metal drive shaft is used to mount the idler pulley which is the middle pulley between the motor drive shaft and the belt drum pulley. This drive shaft is sold as an individual replacement part, please note the key is sold separately.
Pulley 11-55.6
$26.94
In Stock
Fix Number
FIX10142285
Manufacturer Part Number
222148-0
This is an authentic Makita replacement part manufactured for use with belt sanders. The special pulley is used to drive the helical gears that drive the drum to move the belt around the sander. This pulley is available as an individual replacement part, please see model diagram for associative parts.
Driven Pulley
$27.80
Special Order
Fix Number
FIX10172024
Manufacturer Part Number
398030-00
This is an authentic DeWalt replacement part, it is not an aftermarket imitation. The pulley is OEM sourced to be used with belt sanders. This item connects to the roller shaft assembly and is rotated by the motor's drive belt to drive the belt roller. This item is available as an individual replacement part.