Sander Polisher Legs and Feet

Fix Number

FIX10166044

Manufacturer Part Number

144988-02

Genuine OEM replacement part, this item is sold individually. The purpose of the the 144988-02 Foot is to attach the platen to the sander. To replace the Foot, you will need to remove the screws from the platen. Then you will need to separate the motor housing and slide the Feet out of the housings. You will then be able to reverse the procedure and get sanding again.

★★★★★

★★★★★

1 Review

Fix Number

FIX10149678

Manufacturer Part Number

410918-1

This is an Authentic OEM replacement part designed for use with Makita Finishing Sanders. It acts as a support. This part is made out of Plastic with Two (2) Metal Fittings that help to secure it. Includes One (1) Foot per order. You would need a Screwdriver and Pliers to complete the job. • Remove the Sander Pad and a Plate by removing 4 pad mounting screws • Remove the dust vacuum housing by removing 2 screws • Remove flywheel from motor shaft by removing one screw from the motor shaft • Disassemble the main body by removing 4 body screws • Make sure to clean the sander interior • Remove and replace broken foot by sliding it out of the mounting slot • Reassemble the sander

Fix Number

FIX18982019

Manufacturer Part Number

5140086-46

This is a genuine Porter Cable replacement part that has been sourced from the original manufacturer to be used with belt/disc sanders. The rubber foot attaches to the bottom of the base assembly. This item is used to provide a stable footing for the machine to reduce vibration. A screwdriver may be needed to install this part. The rubber foot is priced as a single item.

Fix Number

FIX12530635

Manufacturer Part Number

N472412

Fix Number

FIX19512956

Manufacturer Part Number

2610921132

Fix Number

FIX10146907

Manufacturer Part Number

317535-7

It is a genuine manufacturer-sourced replacement component which is specially designed for Makita sanders. This special foot is attached to the base of the unit, please make sure to check appropriate diagrams of your model for the correct application of this hardware. It is made of durable metal material and it is sold individually.

Fix Number

FIX10147002

Manufacturer Part Number

318151-8

This metal foot is an original Makita part made to fit the finishing sanders listed below. The foot buffers and supports between the bearing box, base, and pad. Sold individually. Often purchased and used with these parts (see manual for which parts are needed): • O Ring, part # 213983-7 or # 213045-1 • Sponge Sleeve 9, part # 424023-8 • Tapping Screw 4X12, part # 266020-6 or Flat Fillister Head Screw M5, part #266511-7

Fix Number

FIX10338661

Manufacturer Part Number

54311

Fix Number

FIX10086096

Manufacturer Part Number

971646001

Fix Number

FIX10317873

Manufacturer Part Number

1342605