Sander Polisher Hoses and Tubes

Popular Sander Polisher Hoses and Tubes

Dust Nozzle
$7.31
In Stock
Fix Number
FIX10150236
Manufacturer Part Number
416497-7
This is a dust nozzle for a belt sander, and it is sold individually. Keep in mind that the O-ring that secures the nozzle into the housing is sold separately. Your belt sander dust bag attaches to this dust nozzle. Its main function is to allow the bag to pivot so you can position it as needed while you are sanding. This plastic nozzle is clamped between the sanders housing and is generally only damaged if the sander is dropped by accident. This is a quick and simple repair that will require you to remove the side cover for access to the part.
Dust Nozzle
$11.09
In Stock
Fix Number
FIX10150127
Manufacturer Part Number
416064-8
This is an authentic Makita part guaranteed to fit the orbit sanders listed below. This dust nozzle attaches the dust bag holder (AKA dust bag nozzle) to the main body/skirt of the sander, held on by a plastic attachment ring. One (1) dust nozzle is included. Dust bag, dust bag holder nozzle, and attachment ring are sold separately.
HOSE, VACCUM
$32.35
In Stock
Fix Number
FIX18990578
Manufacturer Part Number
A01929
This item is a genuine Porter Cable replacement part and has been sourced from the original manufacturer to be used with drywall sanders. The plastic hose is used to ling the hose adapter to the longer hose to collect dust to reduce the amount of drywall dust in the air. This item is available as an individual replacement part.
HOSE REDUCER
$11.53
In Stock
Fix Number
FIX18987425
Manufacturer Part Number
882428
This hose reducer is available as an individual replacement part. It attaches to the hose adapter and reduces the size of the hose. It is made of plastic and will need to be replaced if it becomes broken. This genuine item is supplied by the original equipment manufacturer for use with Porter Cable sanders.
HOSE CONNECTOR
$28.53
In Stock
Fix Number
FIX18987711
Manufacturer Part Number
890961
This item has been sourced from the original manufacturer to ensure a high level of quality. The Porter Cable connector is intended to be used with drywall sanders. The plastic connector is used to link the vacuum hose and the longer rear hose. This item is sold as an individual replacement part, and tools may not be necessary to install this item.
TUBE SUPPORT
$44.55
In Stock
Fix Number
FIX18985696
Manufacturer Part Number
645825-00
This is a genuine item that is supplied by the original equipment manufacturer for Porter Cable drywall sanders. It is an identical replacement for a missing or damaged support tube that was originally installed on a new unit. Refer to the appropriate diagrams for your model for the correct location and application of this component. Keep in mind this high-quality support tube is made of durable material and is sold individually.
GUIDE TUBE
$10.60
Special Order
Fix Number
FIX18987294
Manufacturer Part Number
877774
This replacement tube is an authentic component which is supplied by the original equipment manufacturer for use with Porter Cable drywall sanders. It is the special guide tube that houses the drive shaft. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Please make sure to check appropriate diagram for your model for the exact location and the correct application of this component. Keep in mind this high-quality guide tube is sold as an individual item. A screwdriver and pliers might be needed to perform this repair.
Exhaust Hose (leather)
$41.05
In Stock
Fix Number
FIX12006141
Manufacturer Part Number
658-95
An authentic OEM sourced part that is supplied for use with Alpha pneumatic air polishers. This is a high-quality replacement for a missing or damaged exhaust hose included with the new unit, make sure to refer to the appropriate diagrams of your model for the correct application of his component. It is made of high-quality leather material and is sold individually.
5/8 Nozzle
$17.42
In Stock
Fix Number
FIX10261909
Manufacturer Part Number
658-24
This is an authentic Alpha part made for use in air polishers. This brass nozzle fits into the gear shaft/spindle with an O-ring (part # 658-23) in between to prevent leaks and pressure loss. This nozzle is sold individually.
Dust Nozzle
$21.20
Special Order
Fix Number
FIX10139294
Manufacturer Part Number
151518-5
This #151518-5 Makita dust nozzle will replace a worn or broken sander dust nozzle. It ships as pictured as a complete nozzle assembly. This nozzle is a genuine Makita brand replacement part.rn rnThis dust nozzle will fit the Makita tools listed below. It is not compatible with any other power tool models.

Sander Polisher Hose or Tube Brands