OEM Milwaukee Belt or Drum Sander Parts & Accessories

10-24-1 3/4 Pn Sl Tap Tx

$6.51

Fix Number: FIX10118973
Manufacturer Part Number: 06-82-5474

This is an OEM part sourced directly from the manufacturer. The screw is designed for use in Milwaukee bandsaws and circular saws. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this part. This item is sold individually.

8-16x1/2 Pan Plast. Torx

$6.51

Fix Number: FIX10119042
Manufacturer Part Number: 06-82-7409

This is a genuine Milwaukee replacement part that has been sourced from the original manufacturer to be used with electric power tools. The pan head screw is used with several different types of equipment and the application of the screw can vary based on the model of the machine. This screw is sold as an individual replacement part, please note a torx driver is needed to install this item.

Cord 16-2 6`

$25.71

Fix Number: FIX10122739
Manufacturer Part Number: 22-64-0830

This is a genuine manufacturer-sourced part which is specially designed for Milwaukee equipment. The cord is hardwired to the tool to supply power from a standard U.S. outlet. Over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality rubber insulated cord is sold individually. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. Note, a screwdriver will be needed to take apart and reassembled the housing when replacing this cord.

Brush Retaining Cap

$6.51

Fix Number: FIX10123340
Manufacturer Part Number: 23-44-0170

This brush retaining cap is a genuine OEM item, not an aftermarket alternative. It is a high quality replacement part designed for Milwaukee grinders and sanders. The purpose of the brush cap is to secure the brush in the holder. This cap has external threads that thread into the housing. Be careful when removing and replacing these, they have a tendency to break. Please note, this plastic item is sold individually. You will need a flat-head screwdriver to install or remove this cap.

8-16 X 1.625 Pan Hd. Slotted P

$6.51

Fix Number: FIX10119036
Manufacturer Part Number: 06-82-7382

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in power tools from Milwaukee, such as circular saws and belt sanders. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. The screw is available as an individual replacement part.

Ball Bearing

$6.55

Fix Number: FIX10116871
Manufacturer Part Number: 02-04-1000

This is an authentic Milwaukee replacement part. The ball bearing is designed by the manufacturer for use in drills and sanders. This part is made of metal, and is generally used to allow a shaft to spin freely. It may be found in different locations in the machine, depending on model. Please be aware that there are different ball bearings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require an Allen wrench or screwdriver when replacing this part. This item is sold individually.

8-32 Hex Nut

$6.51

Fix Number: FIX10118121
Manufacturer Part Number: 06-55-0825

This is an authentic replacement part sourced directly from the manufacturer. The hex nut is found in several Milwaukee power tools such as drills and circular saws. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may need a wrench when replacing this part. This item is sold individually.

Strain Relief

$6.51

Fix Number: FIX10131775
Manufacturer Part Number: 44-76-0135

This is a genuine Milwaukee replacement part. The strain relief is designed by the manufacturer for use in heat guns and sanders. This part is made of flexible rubber, and is used to protect the power cord from wearing against the machine housing. You may require a screwdriver when replacing this item. This product is sold individually.

Beveled Retaining Ring

$6.51

Fix Number: FIX10127235
Manufacturer Part Number: 34-80-2021

Timing Belt

$14.34

Fix Number: FIX10128558
Manufacturer Part Number: 42-25-2511

This is a genuine OEM supplied belt which is specially designed for use with Milwaukee power tools. It is an identical replacement for a missing or damaged timing belt that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Installation Instructions

DOUGLAS from ELDORADO, WI

very old.want to keeo it going

simple.just find a parts breakdown. Read more...

Milwaukee Belt or Drum Sander Parts

Popular Milwaukee Belt or Drum Sander Parts

Installation Instructions

Milwaukee Belt or Drum Sander Appliance Types

Popular Milwaukee Belt or Drum Sander Models

Milwaukee Belt or Drum Sander Parts

Start With Your Model Number

Popular Milwaukee Belt or Drum Sander Parts

Installation Instructions

Milwaukee Belt or Drum Sander Appliance Types

Popular Milwaukee Belt or Drum Sander Models