Milwaukee Reciprocating Saw Power Cords

Fix Number

FIX10131782

Manufacturer Part Number

44-76-0210

This cord protector is created to slide onto your cord and fit tightly at the end to protect the base of the cord from getting damaged. If the wires are exposed it can a be a safety hazard, so make sure to replace your cord protector if damaged. Refer to the manual provided by the manufacturer for further installation instructions.

Fix Number

FIX10134042

Manufacturer Part Number

48-76-4008

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

Fix Number

FIX10131777

Manufacturer Part Number

44-76-0150

This is a Genuine OEM replacement Protector Grommet which is used on Milwaukee Power Tools. This part is made out of Rubber and is Sold Individually. It is important to have a cord protector on your tool to improve friction, seal cable and protect it from a potential damage. Replacing this item would differ based on your tool. • First you would need to gain access to internal connections of Power Cord by removing housing of your tool • Once you have disconnected Power Cord you would need to loop it through the Protector • Re-Connect Power Cord to your tool • Secure Cord Protector in the Housing opening and assemble your tool

Fix Number

FIX10122786

Manufacturer Part Number

22-64-1627

This replacement part is an authentic OEM item which is designed for use with Milwaukee power tools. The part is hardwired to the unit in order to supply electricity from a standard U.S. outlet. If the cord is damaged it is important to replace it before continuing to use the equipment. Keep in mind this high-quality rubber insulated power cord is sold as an individual component. Make sure to refer to the appropriate diagrams for your model to ensure the correct repair procedure. You may need a screwdriver to take apart and reassemble the housing when replacing this cord set.

Fix Number

FIX10122717

Manufacturer Part Number

22-64-0595

This cordset is a genuine high quality item that is supplied by original equipment manufacturer for use with a Milwaukee sawzall. If the cord is damaged it is important to replace it before continuing to use the tool. This durable rubber insulated cordset is sold individually, please note the protector is included.

Fix Number

FIX10122818

Manufacturer Part Number

22-64-3190

This is a genuine manufacturer-sourced replacement cord set which is specially produced for Milwaukee power tools. It is used to supply power to the tool from a standard U.S. outlet if the cord is damaged it is important to replace it before continuing to use the unit. This high-quality rubber insulated cord is sold individually, please note the cord protector grommet is sold separately.

Fix Number

FIX10122698

Manufacturer Part Number

22-64-0408

This replacement power cord is a genuine Milwaukee part, it is not an aftermarket imitation. It is supplied directly from original equipment manufacturer for use with a variety of power tools. This cord connects to a standard outlet to supply electricity to a power tool. Please note, the cord protector is not included, it is sold separately. To complete this repair you will need a screwdriver. • Remove the housing screws • Separate the housing pieces • Disconnect the wires • Remove the old cord • Secure the new cord in place • Reassemble and test the tool

Fix Number

FIX10122697

Manufacturer Part Number

22-64-0405

This genuine OEM part is manufactured by Milwaukee. It is compatible with a variety of their handheld power tools. This one (1) piece set includes plug, cord, and cord protector. A cord protector prevents damage to the cord by reducing strain put on the point of connection between wires and machine. Replace this set when any component is damaged.

Fix Number

FIX10122765

Manufacturer Part Number

22-64-1122

This cordset is designed to connect to a standard U.S. outlet to supply power to a power tool. It is a genuine manufacturer sourced replacement part that is made for Milwaukee reciprocating saws. Over time the cord may develop cracks and kinks eventually requiring replacement for safe operation. This durable rubber insulated cordset is sold individually, please note the cord protector is sold separately.

Fix Number

FIX10122764

Manufacturer Part Number

22-64-1121

This is an authentic Milwaukee replacement part manufactured for use with sawzall reciprocating saws. This three wire cord is set in a heavy duty jacket and is sold individually, please note the cord protector is available separately. Recommended parts • Cord Protector, part number: 44-76-0210