Pressure Washer Spark Plugs

Fix Number

FIX9140427

Manufacturer Part Number

796112S

This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resistor type with a 14mm shell design, 3/8-inch reach, and 13/16-inch hex. The heat range is 9 for automotive, small engine, and ordnance applications. The LM indicates 14mm (special for lawn mowers). Before making this installation make sure to drain fuel from the tank and remove the old spark plug.

Fix Number

FIX9074700

Manufacturer Part Number

692051

This item has been OEM sourced to ensure quality. The spark plug is intended to be used with outboard motors and lawnmower engines from Briggs & Stratton. The spark plug threads into the cylinder and is used to create an electric arc that ignites the air/fuel mixture inside the combustion chamber. A spark plug wrench may be needed to install this part. This item is sold individually.

Fix Number

FIX9281094

Manufacturer Part Number

491055S

This spark plug is designed to provide reliable ignition and efficient fuel combustion in small engine applications. Built for consistent performance and durability, it helps maintain smooth operation, steady power output, and easier starting. Ideal for routine maintenance or replacement, it supports dependable engine performance in lawn and garden equipment, generators, and similar outdoor power machines.

★★★★★

★★★★★

1 Review

Fix Number

FIX18789569

Manufacturer Part Number

870174002

Fix Number

FIX9874845

Manufacturer Part Number

0J00620106

Fix Number

FIX9052756

Manufacturer Part Number

610118

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

Fix Number

FIX8988266

Manufacturer Part Number

493880S

This spark plug terminal is supplied directly from the original equipment manufacturer. The metal terminal is designed to fasten the spark plug to the engine lead wire. This component is sold individually, and needle nose pliers are helpful with the repair. Please refer to the appropriate diagrams of your engine model for the proper application of this hardware.

Fix Number

FIX9138640

Manufacturer Part Number

798615

The spark plug is made out of metal and helps to ignite the fuel. This is an authentic part from Briggs & Stratton for use in engines. Keep in mind this high-quality item is sold individually. When replacing this part a wrench and a set of pliers may be needed. It will need to be replaced if it stops working.

Fix Number

FIX8906859

Manufacturer Part Number

19576S

It is an authentic OEM sourced part which is specially made for use with Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a faulty or a missing spark plug wrench that was included with a new unit. The wrench allows a user to secure or remove a spark plug. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this component. A screwdriver will be needed to secure or remove this part. This high-quality part is made of durable metal and is sold as an individual item. Note. This spark plug wrench fits 5/8" and 13/16" spark plugs.

Fix Number

FIX11898182

Manufacturer Part Number

30010-Z010210-0000

The spark plug attaches to the cylinder head. This item is an OEM from Homelite and Ryobi for use in generators and pressure washers. This is available as an individual replacement part. A wrench might be needed during the installation process. It is made of metal and will require replacing if it breaks.