Snapper Pressure Washer Pumps

Fix Number

FIX8908285

Manufacturer Part Number

190627GS

It is a genuine OEM sourced item that is designed for Briggs and Stratton, Snapper and Troy-Built pressure washers. The manifold housing is an important component that attaches to the pump head. It houses the unloader valve, the check valves, the outlet tube and the chemical injection assembly. If the manifold housing is worn or damaged it can cause water leaks and it should be replaced to ensure the equipment is functioning properly. To determine the exact location and the correct installation of this manifold housing, refer to the appropriate diagrams of your model. You will need a screwdriver and a wrench set to perform this repair. This high-quality manifold housing is made of durable metal and is sold as an individual component.

Fix Number

FIX9270371

Manufacturer Part Number

207365GS

Pressure washer pump kit. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. If the pump is more than a few years old, and you use the pressure washer fairly often, replace the pump.

Fix Number

FIX9270303

Manufacturer Part Number

206376GS

This is an authentic Craftsman replacement part. The pump assembly is commonly found in pressure washers. This is a complete assembly, including a relief valve, key, and attachment hose. This part is used to pump water from the water supply hose through the pressure washer.

Fix Number

FIX9042654

Manufacturer Part Number

6039

This is an authentic OEM part from Briggs and Stratton, Troy-Bilt, and Snapper for use with Pressure Washers. The Briggs & Stratton Pressure Washer Pump Saver prevents harmful buildup of hard-water mineral deposits in the pump, maintains pump seals and pistons and promotes longer pump life. It contains anti-freeze to protect the pump from freezing and provides safe winter storage. This part is sold individually. No mixing, stirring or shaking is required. Just attach the pump saver to the pump and dispense.

Fix Number

FIX11829837

Manufacturer Part Number

706386

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton and Troy-Bilt pressure washers. The pump is the main component which creates the pressure, it can generate up to 2550 PSI. This is an identical replacement for a missing or damaged pump assembly which was installed on the new unit, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this durable metal component is sold individually.

Fix Number

FIX18906203

Manufacturer Part Number

194003GS

Fix Number

FIX8903784

Manufacturer Part Number

190654GS

Fix Number

FIX8904701

Manufacturer Part Number

190585GS

This manufacturer-approved oil is commonly used in pressure washers. It is made to lubricate the internal pump drive components. This plastic bottle contains 5.3 fluid ounces of oil. It is recommended to wear work gloves to protect your hands when replacing the pump oil. You may need to purchase this item if you run out of oil or your bottle is damaged.

Fix Number

FIX8837371

Manufacturer Part Number

109B2126GS

Fix Number

FIX8908279

Manufacturer Part Number

190593GS

Genuine OEM replacement part, this item is sold in a kit. This is the part of the pressure sprayer that threads into the pump(First in, Spring then the Ball). The the chemical hose kit connects to it. Then the chemical hose kit is placed in the material (soap) that you want to use to clean the surface you want.