Pressure Washer Caps and Lids

Fix Number

FIX9903522

Manufacturer Part Number

17231-Z0L-050

This is a genuinely sourced small engine air filter cover. This black cover protects the air filter to ensure the engine itself is also protected. It has very small ports to allow proper air flow to the engine. The holding tab may break over time, or the case itself may crack, and will need to be replaced. This part is sold individually and is very easy to install.

Fix Number

FIX17016287

Manufacturer Part Number

5.064-457.0

This genuine Karcher replacement part is sourced directly from the original manufacturer and is designed for use with compatible pressure washers. The plastic cap attaches securely to the pump housing and serves as a cover for the oil fill spout, helping to protect the internal components from dirt and debris. Durable and easy to install, this cap is available as an individual replacement part and is ideal for maintaining the performance and longevity of your pressure washer.

Fix Number

FIX9949502

Manufacturer Part Number

4.132-007.0

This is a drain plug for different models of pressure washers. It is used to seal the check valve for the engine of the pressure washer and features an O-ring that can deteriorate over time. Failing to replace the drain plug can result in water leakage from the pump, potentially causing damage to the pump and surrounding parts, and leading to pump overheating and seizing. To replace this drain plug, you will only need a few tools such as a screwdriver, Allen key, a set of pliers, and a utility knife. First, remove the pump from the pressure washer assembly using a screwdriver or Allen key. Then, disconnect the detergent hose by cutting it with a utility knife. Gain access to the valve(s), which may require you to use a screwdriver and/or hammer to remove the covering plate. Use a set of pliers to rotate and loosen the drain plug and remove it. Apply silicone grease to the new drain plug before installing and securing it. Reinstall the metal plate covering, reconnect the detergent hose to the pump, and reinstall the pump. Monitor your pressure washer for any leaks or other issues with the new drain plug installed.

Fix Number

FIX9085869

Manufacturer Part Number

7075115YP

This is a genuine OEM sourced replacement part designed for use with riding lawn mowers/tractors. This boot protects the rear axle from dust, dirt and debris. It is made out of plastic and it is sold individually. Please note clamps that secure this boot are sold separately. You will need a set of wrenches and a screwdriver to complete this repair.

Fix Number

FIX10020974

Manufacturer Part Number

9.182-506.0

This is a genuine Karcher replacement part that has been sourced from the original manufacturer to be used with pressure washers. The cap attaches to the frame's wheel assembly. This item is used as a hub that covers the center of the wheel where it is mounted to the axle. This item is sold as an individual replacement part.

Fix Number

FIX9948296

Manufacturer Part Number

39-0231

The valve plug goes next to the o-ring. This part is made of metal and is sold individually. It is an authentic Mi-T-M replacement part that is sourced from the original manufacturer for use with pressure washers. It will need to be replaced if it breaks or strips.

★★★★★

★★★★★

1 Review

Fix Number

FIX9140447

Manufacturer Part Number

796577

This is a genuine manufacturer sourced replacement cap for the fuel tank. It is specially designed for use with Briggs and Stratton engines installed on lawn and garden equipment. It is used to keep the fuel in the fuel tank and protect it from outside contaminants. It features a retainer that will remain in the tank to keep the cap from falling out or getting lost. This plastic cap is sold individually.

Fix Number

FIX9949483

Manufacturer Part Number

4.063-807.0

This is a genuine manufacturer approved replacement part for use with Husqvarna chainsaws. It is designed to keep the cleaning agents in the soap tank. It includes a rubber o-ring which provides an air tight seal for the cap. . It is made out of plastic and it is sold individually.

Fix Number

FIX9943499

Manufacturer Part Number

33-0018

This is an authentic replacement part for Mi-T-M pressure washers. The hub cap is designed to fit onto the axle and act as a cover to prevent damage to the axle. This part is made of high-quality material. This item is sold individually.

Fix Number

FIX11889486

Manufacturer Part Number

12310-Z8A-000

This genuine item is supplied directly from the original equipment manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. It is the main cover for the cylinder assembly. The part helps to protect the internal components from dust and other contaminants. If your cover is damaged or is missing, this will provide an identical replacement for the original component that was installed on a new unit. This high-quality head cover is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately. You will need a wrench to perform this repair.